Sanity Check: When I run the “Create Task Sequence Media” wizard from a console connected our CAS, the resultant media refuses to connect to the MP to get policy. When it fails, the logs indicate problem with the certificate authority (we’re in native mode):
AsyncCallback() WINHTTP_CALLBACK_STATUS_SECURE_FAILURE Encountered dwStatusInformationLength is 4 *lpvStatusInformation is 0x8 WINHTTP_CALLBACK_STATUS_FLAG_INVALID_CA is set Error. Received 0x80072f8f from WinHttpSendRequest. sending with winhttp failed; 80072f8f When the exact same process is run from a console connected to the primary, everything works just fine. (All other operations performed on the CAS work as well.) I just want to make sure this is a known issue – or a ‘feature’ – and not just me. Cheers! [CONFIDENTIALITY AND PRIVACY NOTICE] Information transmitted by this email is proprietary to Medtronic and is intended for use only by the individual or entity to which it is addressed, and may contain information that is private, privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination of this information in any manner is strictly prohibited. In such cases, please delete this mail from your records. To view this notice in other languages you can either select the following link or manually copy and paste the link into the address bar of a web browser: http://emaildisclaimer.medtronic.com
