Apparently only required for driver packages..since regular packages or OS images didn't have the issue..but did have the checkmark enabled.. K .?
From: [email protected] [mailto:[email protected]] On Behalf Of Frederic Le Royer0 Sent: Wednesday, September 04, 2013 7:15 PM To: [email protected] Subject: RE: [mssms] Prestage Content - Solved Well looks like removing the check box on "Copy the content in this package to a package share on the dp" actually fix the problem for dp configure for prestage content. If you are distributing the content to others dp's just make sure you put the check mark back. From: [email protected] [mailto:[email protected]] On Behalf Of Johan van Dijk Sent: August-29-13 10:47 AM To: [email protected] Subject: RE: [mssms] Prestage Content Bump. (seeing the same issue here..all other packages are OK..just driver packages aren't.) From: [email protected] [mailto:[email protected]] On Behalf Of Frederic Le Royer Sent: Monday, August 26, 2013 3:14 PM To: [email protected] Subject: [mssms] Prestage Content Hello, . I'm currently Having issues importing some of my prestaged content to my remote distribution point. I'm getting the following errors at the end of the PrestageContent.log. (edited to remove timestamps) CContentDefinition::ExpandContentDefinitionItems failed; 0x80070003 PrestageContent Failed to expand content of package CGN0003C PrestageContent ArchiveFile::Transform2ClassicContentForSMB failed; 0x80004005 PrestageContent Error transforming single instance storage to classic storage for SMB access PrestageContent ArchiveFile::RemoteDpPostExtractProcessing failed; 0x80004005 PrestageContent ArchiveFile::PostExtractProcessing failed; 0x80004005 PrestageContent ArchiveFile::ExtractContent failed; 0x80004005 PrestageContent I have been able to prestage some packages, mainly my OSD image file but the issue seems to be with the driver packages. at the beginning of the log file it states Content type:"LegacyContentBased" for the non-working packages while my working packages specify a "Classic" content type. I presume i<m looking at the right place with the issue, i just don't know what to do about it. Any Suggestions?
