Guys, I'm stumped. I have a system which was encrypted with PGP.
* I decrypted the HDD. * Rebooted the system * Deployed an image via SCCM * Image deployment failed due to MBR locked * I restarted the system and ran the Task Sequence * I paused the Task sequence at the beginning, and ran "Diskpart /Clean" * Image starts to deploy, however, the SCCM Client will fail due to trying to install on a "D" drive. There is no "D" drive. * I swap hdd's and the image installs perfect with the SCCM client logs showing installing from the "C" drive. I know it's something with the PGP being on the HDD. * I put the original drive back into the PC * I ran the following and no luck o Diskpart o Select disk 0 o Clean o Create partition o Active (activates partition) o List partition (I see only 1 partition) o Continue with task sequence and I receive the same error like there's a "D" drive the SCCM client is trying to deploy to. Thoughts? This e-mail is intended solely for the person or entity to which it is addressed and may contain confidential and/or privileged information. Any review, dissemination, copying, printing or other use of this e-mail by persons or entities other than the addressee is prohibited. If you have received this e-mail in error, please contact the sender immediately and delete the material from any computer. To unsubscribe send an email to: [email protected] Hitachi Consulting Corporation, 14643 Dallas Parkway, Suite 800, Dallas, Texas 75254 (HCAD0411)
