Ok, I will use IP Range as boundary, but now I have only a list of my SUBNETS, how can I calculate the IP range based on my SUBNET? Per example:
I have these 2 subnets, how can I know waht is the IPs between them? PARIS SUBNET = 10.201.67.0/24 LONDON SUBNET = 10.201.48.131/255.255.255.192 Regards, 2013/9/24 Kim Oppalfens <[email protected]> > If you use ip subnet as the type, yes. > > > Sent from my Windows Phone > ------------------------------ > From: JRIT <[email protected]> > Sent: 24/09/2013 18:55 > To: [email protected] > Subject: Re: [mssms] IP Subnet Boundaries are EVIL > > Other question around that. If I use this script: > > > http://gallery.technet.microsoft.com/Powershell-script-to-add-40a24d35/view/Discussions#content > > To add all my IP Subnet in a BULK, I need to calculate the SUBNET ID > before, right? Because if I add my Subnet directly my boundary > configuration will not reflect the right configuration based on Subnet + > Mask = Subnet ID. > > Right? > > > 2013/9/24 Trevor Sullivan <[email protected]> > >> Personal experience: IP range boundaries work great.**** >> >> ** ** >> >> Cheers,**** >> >> Trevor Sullivan**** >> >> ** ** >> >> *From:* [email protected] [mailto: >> [email protected]] *On Behalf Of *JRIT >> *Sent:* Tuesday, September 24, 2013 11:34 AM >> >> *To:* [email protected] >> *Subject:* [mssms] IP Subnet Boundaries are EVIL**** >> >> ** ** >> >> Is it true? >> >> http://blog.configmgrftw.com/?p=343**** >> >> ** ** >> >> > > >
