Ok Was not able to find the logs so removed the package from the DP and tried again. I started it around 4pm All evening I watched it copy info to the site. With no issues till I had this error in the pkgxfermgr.log file at around 5am this morning.
Send Request 202ZSGTI~ Job: JFDAMFNQ Destination:
servername.domain.local~ State: Working Status: Failed Action:
Retry~ Total size: 1421219 k Remaining: 364643 k Heartbeat: 05:04~
Start: 12:00 Finish: 12:00 Retry: ~ SWD PkgID:
GTI00097 SWD Pkg Version: 4 SMS_PACKAGE_TRANSFER_MANAGER
1/30/2014 5:05:31 AM 3540 (0x0DD4)
Then like a min later I have this message
Updating job JFDAMFNQ SMS_PACKAGE_TRANSFER_MANAGER 1/30/2014
5:06:21 AM 3540 (0x0DD4)
Send request status is FAILED. SMS_PACKAGE_TRANSFER_MANAGER 1/30/2014
5:06:21 AM 3540 (0x0DD4)
Deleting send request with ID: 202ZSGTI.
SMS_PACKAGE_TRANSFER_MANAGER 1/30/2014 5:06:21 AM 3540 (0x0DD4)
Deleted job JFDAMFNQ. SMS_PACKAGE_TRANSFER_MANAGER 1/30/2014
5:06:21 AM 3540 (0x0DD4)
If I am reading this write it failed once then deleted the job... I have it
limited so at the time it was throttled to 25% of bandwidth.
The Package is about 1.5gig
Any thoughts?
From: [email protected] [mailto:[email protected]] On
Behalf Of Dzikowski, Michael
Sent: Tuesday, January 28, 2014 10:47 AM
To: [email protected]
Subject: RE: [mssms] Package Copy issues with SCCM 2012
Have you looked at the datatransferservice.log?
Are your DPs healthy?
Are you rate limiting with BITS and the transfer is taking a while?
What are the issues you are seeing?
More information could be helpful.
Michael Dzikowski
Senior Systems Engineer | Ally Technical Infrastructure - Windows Hosting
[cid:[email protected]]
From: [email protected]<mailto:[email protected]>
[mailto:[email protected]] On Behalf Of Gerlak, Matthew
Sent: Tuesday, January 28, 2014 10:18 AM
To: [email protected]<mailto:[email protected]>
Subject: RE: [mssms] Package Copy issues with SCCM 2012
Guys,
I am having a lot of Patch Package copy issues since I moved to SCCM 2012.
Mostly copying our patch package out to Remote DP's
I am wondering I built the primary as a Windows 2012 with SQL 2012 and SCCM
2012 SP1. But the Remote DPS are windows 2008 R2.
Is anyone aware of any know issues with this type of setup?
Thanks Matt
<<inline: image001.png>>
