Jason - thanks for taking the time to respond. My primary goal is to utilize the IBCM feature.
Is there a setting I need to configure in DNS to be able to properly discover my clients in the DMZ? I have one primary site in my internal domain. My intention is to utilize IBCM. I am therefore planning on configuring site systems in the DMZ as follows. I am intending on putting the FSP and CRL website on the same server and on the second server a MP/DP/SUP. The reason is the FSP will accept non-encrypted traffic on port 80. Thanks, Brian From: [email protected] To: [email protected] Subject: RE: [mssms] Where are my clients? Date: Sat, 15 Feb 2014 21:02:43 +0000 First note that your boundaries have nothing to do with discovery. AD System Discovery does do an explicit DNS name lookup though and if that fails, a DDR is not generate. Without knowing more, that would be my guess of why those systems are not being discovered. As for placing an MP in the DMZ, you will have issues with this because clients do not use MPs based on location. Without knowing more about your environment, I can’t recommend a perfect course of action though aside from saying that no solution will be perfect because this scenario was just never explicitly planned for in the product design. J From: [email protected] [mailto:[email protected]] On Behalf Of Brian McDonald Sent: Friday, February 14, 2014 5:59 PM To: [email protected] Subject: [mssms] Where are my clients? Hey all, I recently configured a new IP ranges boundary for my DMZ clients. I then assigned that range to a new boundary group called "DMZ clients". :) Moving on, I have System Discovery pointing at my DMZ OU. I have ran a full discovery and currently waiting to gain visibility into the DMZ, however, I cannot. My main goal right now is to install a MP/DP/SUP as well as a FSP. However, I cannot see these clients. What am I missing? Thanks to all! Brian aka 'workin hard'
