Hi James,

thanks. I can't however tell you how long the customer waited. We are now, for 
the time being, telling the technician on site to first connect the VPN and 
then restart the SMS Agent.

-------
David
http://www.david-obrien.net


From: [email protected]
To: [email protected]
Subject: RE: [mssms] network check of configmgr client
Date: Fri, 21 Feb 2014 00:02:44 +0000








If I remember correctly during my testing, it was not an immediate 
detection/transition from internet to intranet or vice versa. The machine
 I was using to test was already a registered client so it may have behaved 
differently but I seem to recall it taking 15-20 minutes after I connected VPN 
before it switched over. How long have you waited? If I were to guess, being 
that its not a registered
 client yet and it hasn’t downloaded a policy, maybe the connection state 
detection interval isn’t defined yet and by restarting the service, you’re just 
forcing it to run detection. I’m sure someone could chime in with better info 
for you but figured I’d share
 my experience. I’m not sure what the default interval is. I’d be interested to 
know though…
 


From: [email protected] [mailto:[email protected]]
On Behalf Of David O'Brien

Sent: Thursday, February 20, 2014 4:12 PM

To: [email protected]

Subject: RE: [mssms] network check of configmgr client


 

somebody? :)



-------

David

http://www.david-obrien.net








From:
[email protected]

To: [email protected]

Subject: [mssms] network check of configmgr client

Date: Wed, 19 Feb 2014 15:56:29 +0100

Hi all,



a quick sanity check.

A client is being installed via standalone media, it's only got a internet 
connection, no connection to the Management point whatsoever.



After installation a technician logs on and gets an internet IP, the configmgr 
client notices that it's not registered but also can't connect to the MP. Now 
the technician connects a VPN and joins the machine to the domain. The machine 
reboots.

After reboot the machine is again not connected to the VPN. 

Technician logs on.

Machine has an internet IP.

Technician connects via VPN.



What I now see is that the configmgr agent still thinks it's on the internet 
(although it's connected via VPN and INSIDE the boundaries).

If the technician now restarts the SMS Agent Host the agent finds it's on the 
Intranet and successfully registers.



Shouldn't the agent detect the network change right away and switch from 
internet to intranet? Or does that only happen AFTER the agent was able to 
register itself and not before?



Thanks!



-------

David

http://www.david-obrien.net

 


 


IRS Compliance: Any tax advice contained in this communication (including any 
attachments) is not intended or written to be used, and cannot be used, for the 
purpose of (i) avoiding penalties imposed under the Internal Revenue Code or 
applicable state
 or local tax law or (ii) promoting, marketing, or recommending to another 
party any transaction or matter addressed herein.


Confidentiality Notice: This e-mail is intended only for the addressee named 
above. It contains information that is privileged, confidential or otherwise 
protected from use and disclosure. If you are not the intended recipient, you 
are hereby notified
 that any review, disclosure, copying, or dissemination of this transmission, 
or taking of any action in reliance on its contents, or other use is strictly 
prohibited. If you have received this transmission in error, please reply to 
the sender listed above
 immediately and permanently delete this message from your inbox. Thank you for 
your cooperation.





                                          


Reply via email to