If the boot image you are booting from, i.e. in PXE/WDS or on Media, is different from the boot image assigned to the TS you will get this message. Even if it just a version difference. It must be exactly the same image.
This is because once the TS starts after booting to WinPE it will check the images and if the one assigned is not the same as the currently running it will download the correct one. At this point you need to reboot to WinPE. From: [email protected] [mailto:[email protected]] On Behalf Of Timothy Ransom Sent: 07 March 2014 00:36 To: [email protected] Subject: [mssms] Task Sequence wizard asks to remove CD and reboot Hi, OK, here is a strange one that just appeared today. 2012 R2 Task Sequence wizard asks to remove CD and reboot to continue. Same if boot from cd or flash. I can zero-touch same PC with same boot image and all is normal. Windows 7 btw. Hope someone has resolved this before. Thanks, Tim ********************************************************************************************** GDOL CONFIDENTIALITY NOTICE: This transmission may contain confidential information protected by state or federal law. The information is intended only for use consistent with the state business discussed in this transmission. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action based on the contents is strictly prohibited. If you have received this transmission in error, please delete this email and notify the sender immediately. Your cooperation is appreciated. **********************************************************************************************
