What's scanstate.log and loadstate.log show? Smsts.log as well? -Daniel Ratliff
-----Original Message----- From: Timothy Ransom [[email protected]<mailto:[email protected]>] Sent: Sunday, March 23, 2014 09:54 PM Eastern Standard Time To: [email protected] Subject: [mssms] Sys Ctr 2012 R2 Config Mgr/running an OSD task sequence using a USMT 4, but network printers were not captured and restored successfully. Hi, Hope someone has resolved this before. Using ConfigMgr 2012 R2 to image Windows XP x86 to Windows 7 x64 with USMT4 (hard link) and everything is captured and restored except network printers. Last year I used the same USMT4 package in ConfigMgr 2007 R3 in the same exact scenario as above and all network printers were captured from XP x86 and restored to 7 x64 with no issues. I deployed UPD drivers in task seq and it went very smoothly. We have approx. 1400 printers at 120 sites and it is critical to be able to backup and restore network printers. Please let me know if you have a resolution. Thanks, Tim ********************************************************************************************** GDOL CONFIDENTIALITY NOTICE: This transmission may contain confidential information protected by state or federal law. The information is intended only for use consistent with the state business discussed in this transmission. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action based on the contents is strictly prohibited. If you have received this transmission in error, please delete this email and notify the sender immediately. Your cooperation is appreciated. ********************************************************************************************** The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information.
