Ok... It's ADK 8.1. Actually I had taken backup of my older drivers that I was earlier integrated for sccm 2012 RTM .... And the same drivers source I have reused to integrate by DISM ... after upgradeding to sccm 2012 R2...
The reason for I have taken default boot.wim is... My all customised wims from sccm 2012 sp1 are not in re-usable..... which is expected as part of the documentation ... Hence I taken source as default WIM... If I suspect the issue with the drivers ... In that case at least one driver should be able integrate by using dism but this is not the case for me... Sent from iPhone....sorry for typos > On 11-Apr-2014, at 1:12 am, "Jason Sandys" <[email protected]> wrote: > > Just to be clear, the ADK for Win 8.1? This is different and updated from the > ADK for Win 8.0. > > You don’t need to change the boot.wim to test a driver, that’s what drvload > is for. > > Also, just adding the driver to boot.wim doesn’t guarantee it will work as it > may not be the correct driver – the forums have many, many cases where this > happens. > > J > > From: [email protected] [mailto:[email protected]] > On Behalf Of Hun boy > Sent: Thursday, April 10, 2014 2:30 PM > To: [email protected] > Subject: Re: [mssms] SCCM 2012 R2 Boot WIM DISM - Drivers Failing > -hr:0xc0000135 > > Yes I have ADK installed on my system and also on sccm server where I tried > add driver package....... > > We have around ~100 models from all vendors ... And I have to build ~100 > models and get the feed back from my felid engineers would take another 30 > days at least as they are lazy... And in between any changes must to be > update the boot WIM Image packed agin going this over the wan would effect > the plan...and sending the USB sticks for slower sites and not would really > painful task .... Hope I will have some solution... > > I have given randomly different models but it failed to inject.... Ex model > T440 and M83... Even tried to give only one model ...still no luck .... I > have tried only NIC even same issue... > > You mean...Does the latest winPE 5.0 has all the latest models drivers till > at least 2013 models???? > > > > > Sent from iPhone....sorry for typos > > On 11-Apr-2014, at 12:48 am, "Jason Sandys" <[email protected]> wrote: > > Does your local workstation have the ADK for Win 8.1 installed? > > And, what Chris just asked? > > And, you shouldn’t just inject every NIC and mass-storage driver that you > have. You should only inject them when the boot image doesn’t already include > and suitable driver. > > J > > > From: [email protected] [mailto:[email protected]] > On Behalf Of [email protected] > Sent: Thursday, April 10, 2014 2:11 PM > To: [email protected] > Subject: Re: [mssms] SCCM 2012 R2 Boot WIM DISM - Drivers Failing > -hr:0xc0000135 > > why not use the built-in driver injection for the boot images? > > Sent from Windows Mail > > From: Hun boy > Sent: Thursday, April 10, 2014 2:53 PM > To: [email protected] > > Hi All, > > I have upgraded my SCCM 2012 RTM to SP1(Not installed any Cumulative updates) > then to SCCM 2012 R2 Successfully... I did not get any errors. > > Before Upgrade my SCCM 2012 RTM/SP1 Images are removed from DP Targets. > > Now my next high priority task is I wanted to integrate my Hardware models > NIC & Mass Storage Drivers to my Boot Images, So that my OSD will work > without any issues. But am getting errors, when I try to add by DISM command > to the Boot Images. > > > I have taken Default boot.wim file from SCCM 2012 R2 and copy pasted to my > work location and ran the DISM command... however I am not successful in this > for integration. > Has anyone have already have solution for this let me know. > > <<<AV is in Disabled state during DISM.. Still no Luck>>> > > Attached my DISM.Log file here... > > Failed to create Dism Image Session in host. - > CDISMManager::LoadImageSession(hr:0xc0000135) > > DISM Manager: PID=3200 A problem ocurred loading the image session. > Retrying... - CDISMManager::CreateImageSession(hr:0xc0000135) > > DISM.EXE: Unable to start the servicing process for the image at > 'E:\Boot_WIM\SCCMR2_WIMS\X86\Temp'. HRESULT=C0000135 > > Thank you In Advance, > Hunboy > > > > >
