I think that may be the issue. I just noticed WDS was not installed on the DP I rebuilt PXE on. Testing it now.
Thank you, Luis Martinez III Systems Administrator Engineer [email protected]<mailto:[email protected]> This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. From: [email protected] [mailto:[email protected]] On Behalf Of Paul Winstanley Sent: Friday, June 27, 2014 2:40 PM To: [email protected] Subject: Re: [mssms] PXE-E55: ProxyDHCP server did not reply to request on port 4011 Does the IP address relate to your WDS server? On Fri, Jun 27, 2014 at 10:37 PM, Martinez III, Luis <[email protected]<mailto:[email protected]>> wrote: Paul, I currently have the following located in my IPv4/Server Options [cid:[email protected]] From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Paul Winstanley Sent: Friday, June 27, 2014 2:31 PM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] PXE-E55: ProxyDHCP server did not reply to request on port 4011 Check your DHCP scope for the following options. Option 60= PXEClient Option 66= WDS name or IP address Option 67= Boot file name On Fri, Jun 27, 2014 at 10:26 PM, Martinez III, Luis <[email protected]<mailto:[email protected]>> wrote: Hello all, I’m new to this list and also administering SCCM. I’ve inherited a environment running SCCM 2012 version 5.0.7711.0. Everything was running smoothly until today. None of our DPs in our office can no longer pxe boot. We receive the following error - PXE-E55: ProxyDHCP server did not reply to request on port 4011. I’ve tried multiple ports and machines only to get the same error. I’ve gone through and unchecked “Enable PXE support for clients” on one of the DPs to rebuild WDS but it did not change anything. I’ve looked for the smspxe boot log on my deploy server and sccm server with no luck. I’ve read random posts and documentation online but have yet to find a resolution. Any help or guidance would be appreciated! Thank you, Luis Martinez III Systems Administrator Engineer [email protected]<mailto:[email protected]> O: 602-464-7679<tel:602-464-7679> C: 480-291-2166<tel:480-291-2166> www.carislifesciences.com<http://www.carislifesciences.com/>
