Stephen, Is the process that you are using to create an initial DDR during OSD documented somewhere? I would like to use this in our environment since we are using RBAC.
Thanks, Chris Brucker From: [email protected] [mailto:[email protected]] On Behalf Of Stephen Leuthold Sent: Friday, July 11, 2014 8:50 AM To: [email protected] Subject: RE: [mssms] SCCM collection creation by script Nice post David. I tried to comment on it but it errored out.... You can use limiting collections with OSD by creating an initial DDR using the SDK to ensure the device is in the correct collection before attempting to run the TS. Provided your limiting collection query only references SMS_R_System. The DDR can create/populate a custom property or an existing, meeting the limiting collection's criteria. This way you can still avoid limiting to All Systems and still use RBA. Sent from my Windows Phone ________________________________ From: David O'Brien<mailto:[email protected]> Sent: 7/11/2014 3:01 AM To: [email protected]<mailto:[email protected]> Subject: RE: [mssms] SCCM collection creation by script Hi, Just as a kind of best practice, don’t limit all your collections to “All Systems”. Why? Have a look here: http://www.david-obrien.net/2014/05/10/configmgr-collection-updates/<https://urldefense.proofpoint.com/v1/url?u=http://www.david-obrien.net/2014/05/10/configmgr-collection-updates/&k=GMHZ9Dahlqe0SnKIljTE3w%3D%3D%0A&r=OSKJGXYtYr5xTrSXzQ1oBSYRDUWLe5BEhWNutaL88rA%3D%0A&m=iaXNd5Y4jZbEyEHjf099fgTRV9w%2FIrIqoMgz4w%2Fcwrs%3D%0A&s=d5c7b1802b4ba426166731342aa5c8262e25548ab37cac8fe88beb7ea299f6a0> Cheers David From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of steven hosking Sent: Friday, July 11, 2014 5:46 PM To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] SCCM collection creation by script HI Jason, understand try these powershell commands: New-CMDeviceCollection -LimitingCollectionName "all systems" -Name x.x.x.x Add-CMDeviceCollectionQueryMembershipRule -CollectionName x.x.x.x -QueryExpression "select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_NETWORK_ADAPTER_CONFIGURATION on SMS_G_System_NETWORK_ADAPTER_CONFIGURATION.ResourceID = SMS_R_System.ResourceId where SMS_G_System_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway = "x.x.x.x"" -RuleName "computers in x.x.x.x" what I would do is export the default gateways from SQL into excel, and then change out the x.x.x.x for the IP address and fill down on the sheet, and copy into notepad, clean up the Tab’s then paste it into powershell ISE and run it hope that helps Cheers Steve From: Jason Wallace<mailto:[email protected]> Sent: Friday, 11 July 2014 5:33 PM To: [email protected]<mailto:[email protected]> Hi there Steve Thanks for that! That is precisely what we DO have and it works really well indeed. I have an engineer sat there however going through a list of several hundred IP subnets and creating this collection. The list that we built was in itself built from a simple DISTINCT selection of default gateways from hardware inventory. I was hoping to go a little further and script the extract from HW inventory and then cycle through this list, creating collections based upon the default gateways Jason ________________________________ From: [email protected]<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Subject: Re: [mssms] SCCM collection creation by script Date: Fri, 11 Jul 2014 06:16:35 +0000 Hi Jason, try this: select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System inner join SMS_G_System_NETWORK_ADAPTER_CONFIGURATION on SMS_G_System_NETWORK_ADAPTER_CONFIGURATION.ResourceID = SMS_R_System.ResourceId where SMS_G_System_NETWORK_ADAPTER_CONFIGURATION.DefaultIPGateway = "x.x.x.x" Just change the x.x.x.x to the default Gateway Address. Cheers Steve From: Jason Wallace<mailto:[email protected]> Sent: Friday, 11 July 2014 3:50 PM To: [email protected]<mailto:[email protected]> Hi folks A dumb question for this morning but . . . I am in the midst of a 2007 - 2012 migration. We want to move devices over by IP subnet as there are a large number of branch offices. I wonder whether someone has a magic script that can allow us to read the default gateway from hardware inventory and then create a series of collections on that please? Thanks ********************************************************************** The information contained in this message from First Financial Bancorp or its affiliates and any attachments are confidential. It is not intended for transmission to, or receipt by, anyone other than the addressee(s), or a person authorized to deliver it to the named addressee(s). If you have received this message in error, you are prohibited from copying, distributing or using the information. Please contact the sender immediately by return email and delete the original message.
