Just thinking about it again I made a mistake, sorry. The date and time if wrong will bomb out (You will get a generic stop code error and arms will be thrown in the air) after you try and run the ts and it starts to verify everything. You are not getting this far so it's not this but non the less, this is good to keep in the back of your mind. I got a few more greys trying to figure this out in a critical time.
Sent from my mobile device. -------- Original message -------- From: Chris Carbone Date:10/11/2014 10:56 PM (GMT-05:00) To: [email protected] Cc: [email protected] Subject: RE: [mssms] Panasonic ToughPad FZ G1 OSD Nightmare. I've come across this a few times and it's only been two things that have caused it. The date and time, at least for the surface pro's, needs to be accurate. The nic drivers ( its probably this one if it's getting stuck at "preparing network connections") you might have to use older drivers and inject them. I had to do that with the asus Eeebox that we use as dp's. Good luck! I hope this helps. Sent from my mobile device. -------- Original message -------- From: Paul Winstanley Date:10/10/2014 12:24 PM (GMT-05:00) To: [email protected] Cc: [email protected] Subject: Re: [mssms] Panasonic ToughPad FZ G1 OSD Nightmare. Have you injected any storage drivers? > On 10 Oct 2014, at 16:21, Rickym61 <[email protected]> wrote: > > By any slim chance does anyone here image Panasonic ToughPads, mainly FZ G1 > MK1 and builds them via the docking station? (as no NIC port on the model we > have) > > If yes, any tricks to getting to build via SCCM, trying to get W7 x86 image > on them. > > We are having issues, it pxe boots, downloads the image, reboots into WinPE, > says initializing, then nothing, once it reboots into WinPE we loose the > keyboard connection, so dont even get to press F8 to check what issues it may > have. > > According to Panasonic I need to add 2 lots of drivers to my boot image, > > USB 3.0 driver & USB to LAN driver which we added both but no joy. > > Any takers? > > Thanks > > Ricky.. > > SCCM 2007 SP2 R2. > This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately. This electronic mail transmission may contain confidential information intended only for the use of the individual(s) identified as addressee(s). If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this electronic mail transmission is strictly prohibited. If you have received this transmission in error, please notify me by telephone immediately.
