So last night in our Australian office I had the same setup. I had the same issue, so I then did the diskpart clean and then reimaged and everything worked fine.
The only issue I had outside of this was that the machine did not join to the domain for some reason. What I do not understand is why for these machines it does not work, but it does work at HQ. It is the same model of machine, except the hdd is a different manufacture, that is all. I am trying to come up with a zti solution in these countries, but having to manually run diskpart before each deployment defeats that purpose. Is there anything else I can look at to see why this is failing on DP’s. Thanks, Kevin From: [email protected] [mailto:[email protected]] On Behalf Of Jason Wallace Sent: Tuesday, November 11, 2014 3:30 PM To: [email protected] Subject: Re: [mssms] Issue with OSD from a DP Tried a DISKPART CLEAN on it? On 10 Nov 2014, at 13:17, Kevin Johnston <[email protected]<mailto:[email protected]>> wrote: I have a DP in the UK. I have everything configured like I do here for my deployments. I can PXE boot, I enter the TS password, then it loads some files and then I get the following: <image002.png> Looking at the SMSTSLog on the machine, I see that there are errors related to “C:\ not bootable, X: is not fixed drive” but that is all. Because I am using vPro and VNC to see the machine, I can’t copy the log file here. This is a brand new out of the box machine. When I do diskpart I see the OS as being letter D: When I boot into the machine (Dell) the OS is actually C: So I thought this may have something to do with it, but since this does not load the UDI wizard to complete I don’t think this is an issue as the drive will get wiped as part of the TS. This same machine works without issue here in the local office, so I am not sure how to fix this issue. I was hoping it would load into the UDI wizard, but it never makes it there. Thanks, Kevin Johnston
