This link got me to the issue. It was KB2984976<http://support.microsoft.com/kb/2984976> causing the issue.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jason King | Solutions Design Team Telephone: 248.853.4841 From: [email protected] [mailto:[email protected]] On Behalf Of Paul Winstanley Sent: Tuesday, February 3, 2015 9:28 AM To: [email protected] Subject: Re: [mssms] RE: CM 2012 R2 CU2 client in provisioning mode after OSD Here's the KB https://support.microsoft.com/kb/2894518 On Tue, Feb 3, 2015 at 2:14 PM, Jason Lang <[email protected]<mailto:[email protected]>> wrote: Most likely, this is a result of your apply OSD step installing update(s) that require multiple reboots. This causes the TS to “break” and not finish properly, leaving the Client in Provisioning Mode. The fix is to NOT install these specific updates (there is a list online somewhere) and/or slipstream these updates into your Reference WIM ahead of time. Hope this helps, Jason Lang From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of King, Jason Sent: Tuesday, February 3, 2015 9:04 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] CM 2012 R2 CU2 client in provisioning mode after OSD Recently, we have started to have a rash of clients that just after OSD has finished, the clients log in and are perpetually stuck in provisioning mode. We haven’t had a problem like this in the past but recently we have seen it start to creep up and be an issue. To Band-Aid the issue we have removed the apply software updates step from our task sequence which has seemed to help. Has anyone else had this issue before and figured out what was causing it? I have seen a lot of posts of people adding reg keys to the TS to take it out of provisioning mode during the TS but my guess is that’s not the best way to go about it. …………………………………………………………………………………………………………….. Jason King | Solutions Design Team Please consider the environment before printing this email. ________________________________ CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies. Note to Patients: There are a number of risks you should consider before using e-mail to communicate with us. See our Privacy & Security page on www.henryford.com<http://www.henryford.com> for more detailed information as well as information concerning MyChart, our new patient portal. If you do not believe that our policy gives you the privacy and security protection you need, do not send e-mail or Internet communications to us.
