When in WinPE, they can be found in Windows\System32\DriverStore

If looking at the boot media, you need to explorer the contents of the
sources\boot.wim image file.

On Wed, Mar 11, 2015 at 12:04 PM Timothy Ransom <[email protected]>
wrote:

> I verified these two drivers in my x64 boot image from the console but
> can’t find them on the physical boot media. Where should they be located ?
>
>
>
> Thanks.
>
>
>
> *From:* Timothy Ransom
> *Sent:* Wednesday, March 11, 2015 11:51 AM
> *To:* [email protected]
> *Subject:* RE: [mssms] RE: Surface Pro 3 dock boot from flash fails
>
>
>
> Thanks for the replies.
>
>
>
> I have those two drivers injected and still not finding dock’s nic.
>
>
>
> May be hw, even from Windows 8.1 the dock is intermittently not found –
> will try another dock.
>
>
>
> *From:* [email protected] [
> mailto:[email protected] <[email protected]>] *On
> Behalf Of *Sean Pomeroy
> *Sent:* Monday, March 09, 2015 4:16 PM
> *To:* [email protected]
> *Subject:* Re: [mssms] RE: Surface Pro 3 dock boot from flash fails
>
>
>
> With these two drives in my x64 boot image, I have successfully imaged
> using a Surface Pro 2 and 3 dock.
>
>
>
> [image: Inline image 1]
>
> On Mon, Mar 9, 2015 at 4:07 PM <[email protected]> wrote:
>
> THIS!!!
>
>
>
> You need to have both injected.
>
>
>
> Once the machine has at least the November firmware, PXE is very reliable.
>
>
>
> Sent from Windows Mail
>
>
>
> *From:* Sean Pomeroy <[email protected]>
> *Sent:* ‎Monday‎, ‎March‎ ‎9‎, ‎2015 ‎1‎:‎53‎ ‎PM
> *To:* [email protected]
>
>
>
> Did you add both "Surface Ethernet Adapters" to the boot image?
>
>
>
> On Mon, Mar 9, 2015 at 1:45 PM Timothy Ransom <[email protected]>
> wrote:
>
> I applied all firmware updates before attempting boot from SCCM flash
> drive and no changes made to power settings.
>
>
>
> Task sequencing Error – Failed to find valid network adapter.
>
>
>
>
>
> *From:* [email protected] [mailto:
> [email protected]] *On Behalf Of *Mears, Mark
> *Sent:* Monday, March 09, 2015 9:06 AM
> *To:* [email protected]
> *Subject:* [mssms] RE: Surface Pro 3 dock boot from flash fails
>
>
>
> You may want to allow the Surface to connect to the WindowsUpdate to pull
> the latest firmware before attempting to image it.  At my last customer we
> found a few units that needed this before we were able to get them to find
> certain device drivers.  Once you get the new firmware you should be fine.
>
>
>
> Thanks,
>
>
>
> *Mark A. Mears, Sr.*
>
> *MCSA, MCTS, MCITP, MCT*
>
> Microsoft Architect | En Pointe Technologies | www.enpointe.com
>
> HQ: 18701 S. Figueroa Street, Gardena, CA  90248-4506 | 310-337-5200
> Direct: (310) 337-4580
>
> Office Ext: 4580
>
> Mobile: (757) 945-2651
>
>
>
> [image: cid:[email protected]] <http://www.enpointe.com/>
>
> [image: MS] <http://www.enpointe.com/microsoft>
>
>
>
> Systems Integrator Licensing Solution Provider (SI-LSP)
>
>
>
> Software Asset Mgmt Gold Partner
> Volume Licensing Gold Partner
> Server Platform Gold Partner
>
>
>
> Communications Gold Partner
> Virtualization Gold Partner
> Collaboration Gold Partner
>
>
>
>
>
> *From:* [email protected] [
> mailto:[email protected] <[email protected]>] *On
> Behalf Of *Timothy Ransom
> *Sent:* Sunday, March 8, 2015 7:12 PM
> *To:* [email protected]
> *Subject:* [mssms] Surface Pro 3 dock boot from flash fails
>
>
>
> Hi,
>
>
>
> Surface Pro 3 dock boot from flash fails to find valid network adapter. I
> am using SCCM 2012 R2 and have followed steps in
> Surface-Pro-3-Deployment-Administration-Guide.
>
>
>
> Has anyone else resolved this issue?
>
>
>
> Not sure what I am missing, no problems importing (1) driver to boot image
> – but guide mentions (3) drivers.
>
>
>
> Thanks,
>
> Tim
>
>
>
>
>
>
> **********************************************************************************************
> GDOL CONFIDENTIALITY NOTICE: This transmission may contain confidential
> information protected by state or federal law. The information is intended
> only for use consistent with the state business discussed in this
> transmission. If you are not the intended recipient, you are hereby
> notified that any disclosure, copying, distribution, or the taking of any
> action based on the contents is strictly prohibited. If you have received
> this transmission in error, please delete this email and notify the sender
> immediately. Your cooperation is appreciated.
>
> **********************************************************************************************
>
>
>
>
>
>
>
>
> **********************************************************************************************
> GDOL CONFIDENTIALITY NOTICE: This transmission may contain confidential
> information protected by state or federal law. The information is intended
> only for use consistent with the state business discussed in this
> transmission. If you are not the intended recipient, you are hereby
> notified that any disclosure, copying, distribution, or the taking of any
> action based on the contents is strictly prohibited. If you have received
> this transmission in error, please delete this email and notify the sender
> immediately. Your cooperation is appreciated.
>
> **********************************************************************************************
>
>
>
>
>
>
>
>
> **********************************************************************************************
> GDOL CONFIDENTIALITY NOTICE: This transmission may contain confidential
> information protected by state or federal law. The information is intended
> only for use consistent with the state business discussed in this
> transmission. If you are not the intended recipient, you are hereby
> notified that any disclosure, copying, distribution, or the taking of any
> action based on the contents is strictly prohibited. If you have received
> this transmission in error, please delete this email and notify the sender
> immediately. Your cooperation is appreciated.
>
> **********************************************************************************************
>



Reply via email to