Three main things:
- Make sure you add the SMSMP property in the Setup Windows and ConfigMgr task - Make sure you have an IP Address Range boundary set up for the subnet where the B&C is happening - For Windows 7, see http://blog.configmgrftw.com/configmgr-2012-application-installation-failures/ J ________________________________ From: [email protected] <[email protected]> on behalf of Lindsay, Charles <[email protected]> Sent: Monday, March 16, 2015 9:00 AM To: [email protected] Subject: [mssms] RE: Install Updates during Build Capture TS Doesn’t sound like you missed a step at this point. Here’s a couple of things to look for… - Does the distribution point that the computer is hitting for the updates have “authenticated users” in the local “Users” group and does the local “users” group have “read” access to the SMSPKGx$ share? - Does it also have “read” access for the folder containing the updates at the NTFS level? - Does the updates folder exist on the DP at the exact location that’s being recorded in the log files? The computer that you’re building the capture on should be invoking the “Network Access Account” that’s established in SCCM (Site Settings -> Software Distribution Component properties) for accessing the distribution point since it’s not a member of the domain. The only time that I’ve seen that particular issue was when someone was trying to be “cute” with limiting access to a distribution point by removing “authenticated users” from the local “users” group, but then again… that broke access to all of the hosted packages and not just updates. From: [email protected] [mailto:[email protected]] On Behalf Of King, Jason Sent: Monday, March 16, 2015 9:09 AM To: [email protected] Subject: [mssms] RE: Install Updates during Build Capture TS SCCM 2012 R2 CU2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jason King | Solutions Design Team Telephone: 248.853.4841 From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of Schwan, Phil Sent: Monday, March 16, 2015 8:46 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] RE: Install Updates during Build Capture TS MDT or ConfigMgr? From: [email protected]<mailto:[email protected]> [mailto:[email protected]] On Behalf Of King, Jason Sent: Monday, March 16, 2015 7:43 AM To: [email protected]<mailto:[email protected]> Subject: [mssms] Install Updates during Build Capture TS I am currently having an issue and I am stumped. I am trying to install updates during the build capture. I am getting a 401 access denied error when it attempts to connect and install the updates. If I join the domain, everything works just fine. Has anyone had this issue? Am I missing an easy step? …………………………………………………………………………………………………………….. Jason King | Solutions Design Team Please consider the environment before printing this email. ________________________________ CONFIDENTIALITY NOTICE: This email contains information from the sender that may be CONFIDENTIAL, LEGALLY PRIVILEGED, PROPRIETARY or otherwise protected from disclosure. This email is intended for use only by the person or entity to whom it is addressed. If you are not the intended recipient, any use, disclosure, copying, distribution, printing, or any action taken in reliance on the contents of this email, is strictly prohibited. If you received this email in error, please contact the sending party by reply email, delete the email from your computer system and shred any paper copies. Note to Patients: There are a number of risks you should consider before using e-mail to communicate with us. See our Privacy & Security page on www.henryford.com<http://www.henryford.com> for more detailed information as well as information concerning MyChart, our new patient portal. If you do not believe that our policy gives you the privacy and security protection you need, do not send e-mail or Internet communications to us.
