Yes, However they have been related to the docking station firmware or BIOS versions and were resolved with a subsequent firmware / BIOS update. We had a few cases where the hardware was simply too old with the hardware vendor not releasing updates to address the issues. In those circumstances we chose not to upgrade those devices to Windows 10. We instead replaced them with updated hardware.
(We use HP no other vendors.) Cheers Damon From: [email protected] [mailto:[email protected]] On Behalf Of Mears, Mark Sent: Wednesday, 29 March 2017 8:16 AM To: [email protected] Subject: [mssms] Windows 10 Docking Issues Anybody seen newly imaged Windows 10 devices that fail to come back up when placed into a docking station? Any known resolutions? Thanks in advance! Thanks, Mark A. Mears, Sr. MCSA, MCTS, MCITP Microsoft Architect | En Pointe Technologies | www.enpointe.com<http://www.enpointe.com/> HQ: 1940 E. Mariposa Ave., El Segundo, CA 90245| 310-337-5200 Direct: (310) 337-4580 Office Ext: 4580 Mobile: (757) 945-2651 [cid:[email protected]]<http://www.enpointe.com/> [cid:[email protected]]<http://www.enpointe.com/microsoft> Systems Integrator Licensing Solution Provider (SI-LSP) Software Asset Mgmt Gold Partner Volume Licensing Gold Partner Server Platform Gold Partner Communications Gold Partner Virtualization Gold Partner Collaboration Gold Partner _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s) to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in writing by PCM, Inc. Furthermore, PCM, Inc. is not responsible for the proper and complete transmission of the substance of this communication, nor for any delay in its receipt. ________________________________ CONFIDENTIALITY NOTICE AND DISCLAIMER The information in this transmission may be confidential and/or protected by legal professional privilege, and is intended only for the person or persons to whom it is addressed. If you are not such a person, you are warned that any disclosure, copying or dissemination of the information is unauthorised. If you have received the transmission in error, please immediately contact this office by telephone, fax or email, to inform us of the error and to enable arrangements to be made for the destruction of the transmission, or its return at our cost. No liability is accepted for any unauthorised use of the information contained in this transmission.
