When you get into WinPE, if you hit F8 do you have an IP Address? If no, then your NIC isn't in your Boot Image. Which ADK/Boot Image version are you using?
On Tue, Jul 11, 2017 at 8:24 AM, Matt Gerding <mgerd...@centurionmp.com> wrote: > Looking for some troubleshooting guidance - > > > > I’ve set up driver packages for multiple devices in SCCM before (HP, Dell, > Lenovo) and have run into almost no issues adding the drivers or deploying > images. However, we recently received new HP hardware (HP EliteDesk 800 G3 > mini desktop), the successor to the 800 G2, which we were using perfectly > fine. I can’t get an image to deploy to the 800 G3. > > > > I grabbed the driver pack from the HP site, went through the normal > process of importing the drivers, adding a package, distributing content to > my OSD distribution point, added drivers to the TS..etc. I noticed a > notification when importing the drivers suggesting that some of the drivers > may not be compatible. I went through the drivercatalog.log file and found > the following: > > > > The INF file data is invalid. Cannot initialize driver information. > > > > \\centurionmp.com\sccm\sourcefiles\OSD\Drivers\Source > \HPEliteDesk800G3MiniWin10_x64\Network\Intel\IntelI219_ > KKMEB2\21.1_12.15.23.7\src\DRIVERS\iqvw64e.inf does not contain any > supported hardware information. > > > > \\centurionmp.com\sccm\sourcefiles\OSD\Drivers\Source > \HPEliteDesk800G3MiniWin10_x64\Network\Intel\IntelI219_ > KKMEB2\21.1_12.15.23.7\src\DRIVERS\iqvw64e.inf does not contain any > supported hardware information. > > > > I thought that maybe I just had a corrupted file. Bad NIC driver. Grabbed > the drivers a second time, but still no luck. Took the drivers off of the > DVD that are packaged with the hardware to see if those would work.. still > no luck. Individually downloaded the NIC driver and tried to inject it into > the boot image. I still have the same issue. > > > > When I PXE boot the machine, it acquires an IP and starts loading winPE. > The process gets to the MDT splash screen, hangs for about 2 minutes and > then the machine reboots and goes back to the PXE network boot. I’ve tried > more than one G3 computer, we have secure boot turned off, the drivers are > x64, we deploy win 10 1607, running SCCM current branch. > > > > Any thoughts? Suggestions? As always, thanks in advance for your help and > insight. > > > > > > Regards, > > > > *Matthew Gerding* > > Information Technology > > Centurion Medical Products > > 517.540.1618 <(517)%20540-1618> > > www.centurionmp.com > > ••••••••••••••••••••••••• > > *PATIENT CARE WITHOUT COMPROMISE™* > > > >