Keep in mind that prevents the issue, it doesn’t fix it if you are currently experiencing it.
Daniel Ratliff From: listsad...@lists.myitforum.com [mailto:listsad...@lists.myitforum.com] On Behalf Of Wendell Hutchison Sent: Tuesday, August 29, 2017 10:54 AM To: mssms@lists.myitforum.com Subject: [mssms] RE: SCCM Image Deployment Issues The new(ish) hotfix for Configuration Manager appears to address this issue. (KB4019926) Best Regards, Wendell Hutchison Network Software Specialist Deming Public School District From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Daniel Ratliff Sent: Tuesday, August 29, 2017 7:56 AM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] RE: SCCM Image Deployment Issues You may want to walk the steps here to verify you don’t have the Unknown Computer bug. https://blog.endpointfocus.com/configmgr-cb-1702-unknown-computer-support-reports-no-task-sequences-available-computer Try creating a new task sequence and deploy it to see if it works. Might try known and unknown computers as well. Any errors or massive amount of policy updates processing in SMS Policy Provider component or policypv.log? Daniel Ratliff From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Matt Gerding Sent: Tuesday, August 29, 2017 9:41 AM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] RE: SCCM Image Deployment Issues Thanks for the quick response. No other unknown objects other than the default x86 and x64. The devices are not being reused. They are new, so the computer objects are not being discovered in SCCM yet. The SMSTS log shows that the policy assignments have been successfully read. However, there is an error in the log that states – “There are no task sequences available to this computer.. Please ensure you have at least one task sequence advertised to this computer. Unspecified error (Error: 80004005; Source: Windows)”. The Task Sequences have all worked up until just recently. I verified that none of the task sequences are disabled and they all show valid deployments to the “All Unknown Computers” Collection, as Available. I also verified that the Boot Image ID is correct and associated with the task sequences. From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of ben.sm...@everestre.com<mailto:ben.sm...@everestre.com> Sent: Monday, August 28, 2017 2:05 PM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] RE: SCCM Image Deployment Issues Sounds like a policy issue. What does the SMSTS log say? Do you have any “Unknown” objects other than the default x86 and x64 ones? Are the machines in the collections you targeted the deployments to? If the devices are being reused, did you verify the old objects are all deleted? I use a query looking for the SMBIOS GUIDs and/or MAC addresses when I double check policy issues like this. Ben From: listsad...@lists.myitforum.com<mailto:listsad...@lists.myitforum.com> [mailto:listsad...@lists.myitforum.com] On Behalf Of Matt Gerding Sent: Monday, August 28, 2017 1:35 PM To: mssms@lists.myitforum.com<mailto:mssms@lists.myitforum.com> Subject: [mssms] SCCM Image Deployment Issues Good morning, I’m having an issue with image deployments and was hoping to get some troubleshooting advice - The issue started randomly late last week. No matter the device (multiple Laptop models and desktops), we are unable to deploy images to our clients. We’re on Current Branch of SCCM and we use MDT (Latest version). There have been no immediate changes to our environment - SCCM, MDT, boot image files, Task Sequences, Drivers Etc. Everything has been working perfectly fine and nothing has been changed. Have also been using multiple ports on the same VLAN we always use that is configured to PXE boot. We can perform a PXE boot and it loads the files for winPE with reference to the correct boot image .WIM file, then it starts initializing windows PE and the MDT splash screen displays. At this point, the task sequences should populate, but they never do and the system reboots and repeats the cycle. While troubleshooting: · I hit F8 to break the sequence to verify that it’s not a NIC driver issue. It’s acquiring an IP address, so I don’t think it’s a driver issue. Again, we have been deploying images to all of these same laptops for months with the same boot images, driver packages, and task sequences. I’m guessing since it doesn’t even populate and let me choose a Task Sequence that the Task Sequences are not the issue. · I’ve tried to use the x86 and the x64 MDT boot image files · I’ve reloaded the boot images and verified that they are distributed to the DP · I have restarted the SCCM servers Any suggestions would be much appreciated! Thanks in advance. Regards, Matthew Gerding Information Technology Centurion Medical Products 517.540.1618 www.centurionmp.com<http://www.centurionmp.com/> ••••••••••••••••••••••••• PATIENT CARE WITHOUT COMPROMISE™ ________________________________ This e-mail is intended only for the person or entity to whom it is addressed and may contain information that is privileged, confidential, or otherwise protected from disclosure. If you are not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of this message is prohibited. If you have received this e-mail in error, please contact the sender immediately and delete the original message and all copies from your system. Statements and representations made in this message are not necessarily that of the Company. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. Humana Inc. and its subsidiaries comply with applicable Federal civil rights laws and do not discriminate on the basis of race, color, national origin, age, disability or sex. Humana Inc. and its subsidiaries do not exclude people or treat them differently because of race, color, national origin, age, disability or sex. English: ATTENTION: If you do not speak English, language assistance services, free of charge, are available to you. Call 1‐877‐320‐1235 (TTY: 711). Español (Spanish): ATENCIÓN: Si habla español, tiene a su disposición servicios gratuitos de asistencia lingüística. Llame al 1‐877‐320‐1235 (TTY: 711). 繁體中文(Chinese)：注意：如果您使用繁體中文，您可以免費獲得語言援助 服務。請致電 1‐877‐320‐1235 (TTY: 711)。 Kreyòl Ayisyen (Haitian Creole): ATANSION: Si w pale Kreyòl Ayisyen, gen sèvis èd pou lang ki disponib gratis pou ou. Rele 1‐877‐320‐1235 (TTY: 711). Polski (Polish): UWAGA: Jeżeli mówisz po polsku, możesz skorzystać z bezpłatnej pomocy językowej. Zadzwoń pod numer 1‐877‐320‐1235 (TTY: 711). 한국어 (Korean): 주의: 한국어를 사용하시는 경우, 언어 지원 서비스를 무료로 이용하실 수 있습니다. 1‐877‐320‐1235 (TTY: 711)번으로 전화해 주십시오. The information transmitted is intended only for the person or entity to which it is addressed and may contain CONFIDENTIAL material. If you receive this material/information in error, please contact the sender and delete or destroy the material/information. Humana Inc. and its subsidiaries comply with applicable Federal civil rights laws and do not discriminate on the basis of race, color, national origin, age, disability or sex. Humana Inc. and its subsidiaries do not exclude people or treat them differently because of race, color, national origin, age, disability or sex. English: ATTENTION: If you do not speak English, language assistance services, free of charge, are available to you. Call 1‐877‐320‐1235 (TTY: 711). Español (Spanish): ATENCIÓN: Si habla español, tiene a su disposición servicios gratuitos de asistencia lingüística. Llame al 1‐877‐320‐1235 (TTY: 711). 繁體中文(Chinese)：注意：如果您使用繁體中文，您可以免費獲得語言援助 服務。請致電 1‐877‐320‐1235 (TTY: 711)。 Kreyòl Ayisyen (Haitian Creole): ATANSION: Si w pale Kreyòl Ayisyen, gen sèvis èd pou lang ki disponib gratis pou ou. Rele 1‐877‐320‐1235 (TTY: 711). Polski (Polish): UWAGA: Jeżeli mówisz po polsku, możesz skorzystać z bezpłatnej pomocy językowej. Zadzwoń pod numer 1‐877‐320‐1235 (TTY: 711). 한국어 (Korean): 주의: 한국어를 사용하시는 경우, 언어 지원 서비스를 무료로 이용하실 수 있습니다. 1‐877‐320‐1235 (TTY: 711)번으로 전화해 주십시오.
