Sorry for not using English...
>Miaco answerd by asking what the respond was when running
MSXCDX2 instead
>of MSXCDEX. The result is the same, no wonder, MSXCDX2 is
for the GREEN or
>BERT interface.
Not for the BERT interface!
>Also he asked if I had the second harddisk on ID2 this
would be a problem
>running the CD-ROM on ID2. The second HD is a ZIP drive,
external that only
>uses ID 5 or 6, but I have it on 5 because de interface is
on 6. The Zip
>runs fine, using MAP to switch partitions.
I did not expect anything else!
>I suspect the interface giving as info HD in the initiation
af the
>interface, that the CDROM is recognised as a big capacity
Harddisk, also
>because he disappears when I set the interface off Large
Partitions.
Large partitions should not matter! cd should be recognized
as cd, not as a big harddisk!
>possible I will try an other SCSI CDROM, but then I have to
dismount it
>from my PC. (it is a Plextor 8speed with caddy-load, the
CDROM I am using
>now is a Toshiba 4speed.)
Should be no problem. Maybe you can check the toshiba on
your PC if it is al right...
>Does anybody has the other MSXCDEX ? (I have version 0.40)
Not that I know of
Greetings
Maico Arts
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
