>
>Question 1:
>Can anyone help me ??? I have Sony HB-G900P that is hevily modifyed
>as 2nd computer. It has now 2 peases of D15 connectors in back panel,
>one of them is male and other is female. I have also 2 cables for it,
>I only don't know, where to put the other ends. Am I only one, that
>has these connectors ???
This are RS232 connectors, the female is a normal connector for a computer
the male is configured like the one on e.g. a modem.
>
>Question 2:
>
>There is also few BASIC command's, that I can't understand in slot 0-3
>
>(#4000-#5F5F) :
>
>_LDPINIT
>_LDPCSRCH
>_LDPFRM
>_LDPCSTART
>_LDPOUT
>_LDPSRCH
>_LDPSTART
>_LDPSTAT
>_LDPWAIT
>_GLOAD
>_GSAVE
>_LDPEND
>_INDEXON
>_INDEXOFF
>_ESCON
>_ESCOFF
>_LDPCONT
>_ASW *
>_LDPSTOP
>_SLFONT *
>
>* = Atleast these needs some arquments
>
>All I can get is : *** COMMUNICATION NOT READY ! ***
>
>I know, that there is also few other errors like :
>*** LDP OUTPUT ERROR ! ***
>*** LDP SPEED MODE ERROR ! ***
>*** LDP FRAME NO. ERROR ! ***
>*** LDP CHAPTER NO. ERROR ! ***
>*** LDP REPEAT TIMES ERROR ! ***
>*** OUT OF SCREEN ***
>ILLEGAL SCREEN MODE
>OUT OF SCREEN AREA
>
>How to get these errors too ? :)
This are commands to controll a sony laser disk player, the player must be
connected to the rs232
>
>HB-G900P's SERVICE MANUAL says that in slot 0-3 (#4000-#7FFF) shoud
>contain Video Utility ROM. Is this it ??? / how to use it ???
>
>Question 3:
>There is 8K RAM in slot 0-2 in addresses #2000-#2800,#6000-#6800
>#A000-#A800 and #E000-#E800
>Question is WHY ?!?!!?
>
this is the buffer ram and working area of the rs232
>I am VERY happy, if you can ansfer any of my questions these things are
>driving me grazy !!!
>
>Greetings :
>
--
-----------------------------------------------------------------
\
\ <><><><><><><><><><><><><><><><><><><><><><><><><><><>
\ <> greetings form [EMAIL PROTECTED] (erik de boer) <>
\ <> tel/fax (+31) 20 6459131 <>
\ <> visit my home page at http://www.xs4all.nl/~erbo <>
\ <><><><><><><><><><><><><><><><><><><><><><><><><><><>
\ A blown fuse is'nt defective , it's just doing his job.
\ When you replace it by a new one you can even see it work.
-----------------------------------------------------------------
