> > >I need to make a lead Turbo R to Scart connector, who can send me the
> > >wiring diagrams or better, who can make this lead for me?.
> >
> > Turbo R DIN RGB plug: (seen from cable side)
> > Note: this is the same as SONY HB700 RGB plug
> >
> > 7 6
> >
> > 3 8 1
> >
> > 5 4
> > 2
> >
> > Pin: Description:
> > 1 ground
> > 2 audio
> > 3 status composite
> > 4 composite
> > 5 status RGB
> > 6 red
> > 7 green
> > 8 blue
> >
>
> Not quite correct !
> The layout of the pin numbers on the plug is, but you mixed up a
> couple of signals. Correct layout for the Turbo-R RGB connector (8-p.
> DIN) would be:
>
> 1 ground to SCART pins 4, 5, 9, 13, 14 & 18
> 2 audio to SCART pins 2 & 6
> 3 status RGB to SCART pin 8
> 4 composite video to SCART pin 20
> 5 Ys (luminance) to SCART pin 16
> 6 red to SCART pin 15
> 7 green to SCART pin 11
> 8 blue to SCART pin 7
The connections are almost the same as in Maarten's version, but you use
different descriptions for the pins. That is strange, because Maartens
descriptions match with the descriptions of the SCART connector. And yours
don't. What's the matter here?
> > To Manuel Bilderbeek: Is this info already in the FAQ? If not, please add i
t.
>
> To Manuel Bilderbeek: Is this info correct in your MSX FAQ? If not,
> please correct it. If yes: well done!
Well, I added the other pins...
Grtjs, Manuel
PS: MSX 4 EVER! (Questions? See: http://www.faq.msxnet.org)
PPS: Visit my homepage at http://www.sci.kun.nl/marie/home/manuelbi
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
