> So you have a ZIP drive connected to your MSX? I am planning to do the same.
> Do you have any tips? I have a HSH SCSI interface.
1) get the diskROM replaced (eg. by a Novaxis). That should be no problem.
I let Erik Maas do it on my proto-HSH...
The only thing you need then are the tools (nfdisk) to partition a ZIP
disk. My original HSH had the problem that it recognized only 1 device,
which had to be at id #0 or #1. If you plan to use the 'mobile' version
of the ZIP, keep in mind that that thing can only be used as #5 or #6...
2) Put MSXDOS2.SYS and COMMAND2.COM on _all_ partitions, so you won't have
trouble booting the system if the A: partition gets corrupted. (Holds
for harddisks, too, by the way :-))
3) Keep your HD, if you already have one. Or you won't be able to copy
(large) things between two ZIP disks easily :-)
Eric (MSX & ZIP (& PC & all the rest) just collecting dust
at the moment :-( )
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
