Hi,

        Today I did connect an external FDD used in laptops to my MSX2. These
drives have only a 26-pin connector. Here goes the cable schematics.
Somebody may put it in a MSX hardware page...

        pin at FDD connector (26)       pin at MSX drive interface conn.(34)    signal 
name
        1                               - (from power source)                   +5V
        2                               8                                       Index
        3                               - (from power source)                   +5V
        4                               10                                      Drive 
select 0 for drive A: or
                                        12                                      Drive 
select 1 for drive B:
        5                               - (from power source)                   +5V
        6                               Not connected                           Disk 
change
        7                               Not connected                           
Reserved
        8                               34                                      Ready
        9                               Not connected                           Media
        10                              16                                      Motor 
on
        11                              Not connected                           
Density select
        12                              18                                      
Direction
        13                              Not connected                           In use
        14                              20                                      Step
        15                              odd pins and power source               
Ground, 0V
        16                              22                                      Write 
data
        17                              odd pins and power source               
Ground, 0V
        18                              24                                      Write 
gate
        19                              odd pins and power source               
Ground, 0V
        20                              26                                      Track 
00
        21                              odd pins and power source               
Ground, 0V
        22                              28                                      Write 
Protect
        23                              odd pins and power source               
Ground, 0V
        24                              30                                      Read 
data
        25                              odd pins and power source               
Ground, 0V
        26                              32                                      Side 1 
select

        Greetings,

Werner Augusto Roder Kai - MSX Core Club - MSXMIX
Rua Regente Feijo' , 865 centro
18900-000 Santa Cruz do Rio Pardo - SP
telefone: (014) 372-7349
e-mail: [EMAIL PROTECTED]
homepage: http://wernerkai.cjb.net



****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****

Reply via email to