Manuel Bilderbeek ha scritto:
> >
> > Dear Manuel,
> >
> > We are an Italian company and we produce coin-op boards and software.
> > Since the capabilities of the embedded boards that are normally used for
> > the delivery of gambling software are very limited, we would like to
> > check if it could be possible to integrate an MSX computer on a
> > JAMMA-standard board (the JAMMA connector is the standard connector in
> > this field).
>
> Aha! Sounds like an original idea!
>
> > The MSX should be quite good for this, in our analysis (one of our
> > programmers knows the system very well, he aften came to Holland and he
> > ran an MSX club in Milan); our problem is that we would like to have an
> > idea on who could design such a board, and to be certain that after some
>
> There are quite some hardware freaks in The Netherlands, Spain and in some
> other European countries too. Maybe you can get some nice reactions of those
> people if you post this message in the MSX newsgroup: comp.sys.msx. You could
> also send a mail to The MSX Mailinglist ([EMAIL PROTECTED]). Since you're not
> subscribed to that list, mention that people who are interested should mail to
> you directly.
>
> > time we will not run short of components, i.e. the board could be
> > produced for AT LEAST 4 or 5 years.
>
> That depends on what you need on the board. Z80 CPU's can be bought almost
> anywhere, and expect it to be available for quite some years. I don't know
> about other components. If you also need a VDP, it might be harder to get
> them. But maybe Yamaha can deliver lots of them. I don't know. You'd better
> ask the manufacturers of the specific components. Also, asking a MSX hardware
> freak could be useful.
>
> > Could you please help us in this matter, maybe giving us some advice and
> > some adresses?
>
> Please post this on the MSX Newsgroup and/or mailinglist.
>
> > Waiting for your kind reply. Thanks in advance and best regards
> > Carlo Cattoni
>
> Thanks for asking this to me! It's quite a nice idea, to use MSX technology
> for these purposes! I like it!
>
> Grtjs, Manuel
>
> PS: MSX 4 EVER! (Questions? See: http://www.faq.msxnet.org/)
> PPS: Visit my homepage at http://www.sci.kun.nl/marie/home/manuelbi/
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****
