Pazos,

> EVA files are not compressed.

  Yes, but MSX has "power-horse" to decompress data and maintain
  synchro?

> External PCM indicates that the sound is taken from the 'jack' in the
> back part of turbo R.

  Hmm? Weird... I'm use this option to capture audio and nothing
  happening, no sound was saved. I'll try again later...

> Internal PCM uses built-in microphone of turbo R.

  But if I put something in the jack, I automatically disable the
  internal MIC? Or I'm drunk?

> Each second takes 150Kb (in 10 frames mode). So each frame takes up 30
> sectors.

  Is a sooooo large throughput...

> Well, that is not the reason. The reason is that CD drive 'is not fast
> enough' using the same read system that in HDD.  EVA player read byte
> by byte with a SCSI command, and CDs are not fast enough in that way.

  Are you sure? If I'm using a 8x CD-ROM I can obtain a necessary
  transfer rate.. I believe thatthe problem is because the conversion of
  one "2048 bytes" sector to four "512 bytes" sectors...

> Anyway, you can play EVAs from CD with a modified EVA player made by
> Trunks (sorry, I don't remember the URL). But don't expect too much,
> it just show frame by frame (with sound) but not in the right time. It
> is slow.  Furthermore, with this program you can see EVA on a turbo R
> without MegaSCSI, because it uses MSXDOS2 file handle system.

  I'll try later but first I'm connect my CD-ROM in my MSX. Hey! How I
  can buy a SCSI Cd-ROM case? Here in Brazil it's is impossible, here is
  the country of IDE... (argh!).

>>End of History...
> Ok... more news; Okei is trying to modify EVA program to digitize more
> than 32MB on MSX. 

  And now... End of History.


  ---
  Giovanni Nunes
  [EMAIL PROTECTED] - [EMAIL PROTECTED]
  http://www.geocities.com/ResearchTriangle/2472/


****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put
in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the
quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/)
****

Reply via email to