RuMSX 0.18 has been released and is downloadable at: http://www.casema.net/~tfh RuMSX V0.18 contains following changes since V0.17: - RuMSX was not able to find required files, if started from Windows NT command-prompt. - RuMSX caused lockup of the Windows NT shell (SP4), if new instance was started after 1st one closed (problem was related to the used sound-driver). - VDP processes now also commands in screens-modes less than screen 5 (only if CMD bit set). - FullScreen display sometimes used an incorrect aspect-ratio if zooming is active. (depending on the currently used resolution) - VDP failed to switch to PAL (50Hz) (this bug was new since RuMSX V0.15) - Fixed problems during large debug-output (i.e. disassembly is performed) + Could not interrupt: Ctrl+C for break added + RuMSX did not terminate if closed during output - HiRes drivers for Screen 5, 6, 7 and 8 added (drivers do currently not support sprites) - MouseEmulation required DirectX 5.0, even if DirectX 3.0 would be enough! - "MSX web links..." added to the help-menu - KANA-LED did not work since RuMSX V0.16, fix includes general improvement of KANA-LED - New topic "VDP behavior added" to the RuMSX help documentation. Changes of this documentation are still not implemented yet. Thanks to Alex Wulms for this VDP description! - Compiler changed from Visual C++ 5.0 to 6.0a - Added autofire if using Joysticks, Button 3 is autofire MSX-Joystick button 1 Button 4 is autofire MSX-Joystick button 2 - increased sound-buffer for proper playback on SoundBlaster Live! and other new soundcards - added beta-support for DirectX-Joysticks - TMS9918A (MSX1) used always the previously set screen-refresh rate. This value is now fixed in the configuration-files (50Hz) - Concatenated tape-images might fail to load - updated SETUP.EXE-utility for registration of additional extensions (*.ds1, *.ds2, *.ri) - MSX-Basic documentation updated (PAD, PDL, ...) - Sprites in mode 1 (SCREEN 0-3) were incorrectly affected by the VDP horizontal-adjustment setting Go visit the MSX Emulator Page (M.E.P.) http://www.mep.msxnet.org http://surf.to/msxemu http://www.casema.net/~tfh ICQ:12222446 Go visit the MSX Emulator Page (M.E.P.) http://www.mep.msxnet.org http://surf.to/msxemu http://www.casema.net/~tfh ICQ:12222446 **** MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED] and put in the body (not subject) "unsubscribe msx [EMAIL PROTECTED]" (without the quotes :-) Problems? contact [EMAIL PROTECTED] (www.stack.nl/~wiebe/mailinglist/) ****
