I got the PAINTER.ROM running with MSX2+ ROM's too. Just switching
to the MSX2+ configuration did the job. But the MSX2 configuration
still hangs.
Can you mail me these MSX2 ROM's so I can verify a few things ?
Frits
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> [EMAIL PROTECTED]
> Sent: Wednesday, February 23, 2000 12:06 PM
> To: [EMAIL PROTECTED]
> Subject: Re: information about PAINTER.ROM
>
>
> I got the thing running with fMSX (DOS version) and work
> perfectly. I used
> MSX2+ ROM's but it works fine on MSX2 ROM's as well...
>
>
> GreeTz, BiFi
>
> Frits Hilderink <[EMAIL PROTECTED]> schreef in nieuwsbericht
> <000601bf792b$8dda1ea0$1500a8c0@frits>:^^^p^`^0^...
> >
> >
> > I'm looking for some information about PAINTER.ROM and
> > specifically information about emulating this ROM.
> >
> > I know it is a ROM of 64 Kbyte that has to be loaded
> > in a main slot or sub slot starting at address 0000h.
> >
> > But when added within NLMSX and the command 'CALL PAINTER'
> > is given, the MSX hangs.
> >
> > Maybe there is something wrong with the context. Should
> > I use MSX2+ roms instead of MSX2 ? Or something else ?
> >
> >
> > Frits
> >
> > ****
> > MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
> > and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
> > the body (not the subject) of the message.
> > Problems? contact [EMAIL PROTECTED]
> > More information on MSX can be found in the following places:
> > The MSX faq: http://www.faq.msxnet.org/
> > The MSX newsgroup: comp.sys.msx
> > The MSX IRC channel: #MSX on Undernet
> > ****
>
>
> ****
> MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
> and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
> the body (not the subject) of the message.
> Problems? contact [EMAIL PROTECTED]
> More information on MSX can be found in the following places:
> The MSX faq: http://www.faq.msxnet.org/
> The MSX newsgroup: comp.sys.msx
> The MSX IRC channel: #MSX on Undernet
> ****
>
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
