> Hi,
>
> Please, could you explain more about this IDE Interface ?
>
> Only DOS2 or DOS 1 too ?
As all harddisk-interfaces, only under Dos 2.
> 1 - Works under what MSX types (1,2,2+,T-R) ?
Since Dos 2 is required the minimal MSX system requirement is MSX2.
> 2 - What types of IDE Hard Disks can be used ?
All.
> 3 - And about HD size and partitions ?
At the moment (with FAT12) the partition size is 32 MB (as on all
interfaces), and the max. number of partitions is 32. So a total of 1 GB can
be used. That's way enough for MSX. I've got 540 MB and I am only using
about 30% of it. And if you want to be able to use more, FAT16 is in
development.
It is really one of the fastest (and also the cheapest) interfaces.
Do not use disk-cache, because it only slows your harddisk down!!!
I am VERY pleased with it.
~Grauw
--
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
email me: [EMAIL PROTECTED] or ICQ: 10196372
visit my homepage at http://grauw.blehq.org/
>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
