At 21:13 3-6-00 +0200, you wrote:
> > On Wed, 31 May 2000, Francisco Alvarez wrote:
> > > And he says that EVA player works with Z80 (not R800), but MSX2 don't
> > > have PCM for music. Can works with PCM from Music Module or +PCM?
> >
> > You can output PCM to the Music Module (one of the lower ports, around
> > #10). But it's difficult to time: you can't use the Sample RAM for PCM
> > like you can for ADPCM. So you have to send PCM one byte at a time,
> > directly to the DAC.
It's port #0A to be exact. You need to set a few registers first (I thought
you need to write #01 into registers #18 and #19) before you can flood port
#0A with PCM-data. Most of the direct inputs for PCM-data is easier timed
than you think (except when putting it on an interrupt).
>In that case, what about supporting SiMPL, a 8-bit DAC connected to the
>printerport, very easy & cheap to make???
MSX Computer Magazine 50 still has the schematics for this thing and the
somehow official name is Covox.
GreeTz, BiFi
Visit my Home Page at www.bifi.msxnet.org
mail me at: [EMAIL PROTECTED]
FTP: ftp.bifi.msxnet.org
ICQ #36126979
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
