I think you scart to composite cable only uses the composite signals which
are also in the scart available... So the RGB signals do not reach the
monitor. With this cable you have do you have a proper image on the monitor
or not?
open up the scart connector (if possible) and you will see just some wires.
greetings
Maico Arts
> -----Oorspronkelijk bericht-----
> Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Brendan Cross
> Verzonden: zaterdag 24 februari 2001 23:53
> Aan: [EMAIL PROTECTED]
> Onderwerp: RE: SCART to composite
>
>
> Unfortunately, I don't know the insides of the SCART-to-composite
> lead, as
> it came secondhand with the MSX2. Perhaps it still outputs an RGB signal,
> which my television doesn't understand, only with separate
> composite cables?
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>
> --
> For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
>
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
