On Wednesday 28 February 2001 18:21, you wrote:
> Check if there is a D(rive)S(elect) jumper on the diskdrive... many
> diskdrives do not have jumpers but are soldered (SMD-resistor!). Be sure
> that DS=0 for drive A en DS=1 for drive B.
Good one! I forgot about that.
Try [files "B:"] in BASIC and see if the drive reacts.
I'm using a PC-like twisted floppy cable in my 8250, but it's been a long
time since I opened it, so I forgot about it. I put two drives on a single
cable and used the second drive connector to place the jumper over pin 33 and
34.
Bye,
Maarten
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
