I have a question about that; is the flatcable you modify the drive cable
itself that connects the drive to the MSX2?
----Original Message Follows----
From: Maarten ter Huurne <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Putting PC drives in a 8250
Date: Thu, 1 Mar 2001 15:18:11 +0000
On Thursday 01 March 2001 10:53, you wrote:
> Anway, I added this all to the FAQ, see the misc fAQ section. Could you
> check for me if it is okay and complete?
- This question is not listed in the table of contents (FAQ first page).
- These tips also work on the NMS8255 and probably the 8280 as well.
- Typo: "(over a length of aboyt 4 cm!)"
- If you want to use HD disks in the drive regularly, you also short the
sensor that checks for the HD hole.
- You could add that it's possible to put two drives on one cable, as long
as
one reacts to DS0 and the other to DS1.
Bye,
Maarten
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
