Re: Problems when installing UZIX 0.1.8

[Adriano Camargo Rodrigues da Cunha]

Nestor,

Many thanks for your detailed report about UZIX. I'll read it carefully and try
to fix the problems.

Some comments:
1) UZIX really changes the sector 0 of the partition where it will be installed
(of course, because UZIX bootsector is not equal to MSXDOS bootsector).
Checking MegaSCSI partitions, sector 0 of a partition is just a normal
bootsector. Where is the data about partitioning?

2) The problem with drive D/E should not occur (Luciano Sturaro had the same
problem during betatesting and I fixed it). Byt the way, I was going to use
your partition selection utility, but it didn't work on Daniel Caetano's
MegaSCSI, so I had to quit...

3) When you boot MSXDOS from UZLO, your drive E has your default MSXDOS
partition enabled?

4) I never tested UZIX with an external mapper just because I don't have one.
So, please, do not use an external mapper with UZIX until I can fix this bug.

Regards,


=====
Adriano Camargo Rodrigues da Cunha                 ([EMAIL PROTECTED])
http://www.adrpage.cjb.net                      MSX: more fun per less MHz

_______________________________________________________________________________________________
Yahoo! GeoCities
Tenha seu lugar na Web. Construa hoje mesmo sua home page no Yahoo! GeoCites. É fácil 
e grátis!
http://br.geocities.yahoo.com/

--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html