Hello Girls and Boys,
A question about the Philips MSX PC card. I have such a card (no, I'm not
willing to sell it ;-) ) in my PC and it works great, but...
On the card is a 50 pins male 'connector' (much like a SCSI connector), of which
I suspect that it is a cartridge slot 'connector'. I've soldered a flat cable
connector to a cartridge slot connector (some nifty soldering if I say so
myself) and connected it to the card (via a flatcable). The results I can
measure are that the GND, +5V, +12V and -12V seem to be at the correct
locations. The result if I power up the 'MSX' are that it powers up, but does
not (correctly) run the cartridges. It seems to do something, but I cannot make
out what it does AND it is not consistent.
PLEASE HELP ME, I'M DESPERATE!
Does anybody have the schematics for this card (at LEAST of the connector)!
Regards,
Jeroen Smael
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
