Sure, bring it.
I suggest you ask then Bas Kornalijnslijper for help, he is a specialist in
repairing.
Hans
-----Original Message-----
From: MSX World [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 17, 2001 22:04
To: [EMAIL PROTECTED]
Subject: RE: Problems with NMS8280 MSX 2 / 2+
Shall I bring the computer with me @ the fair on Sathurday? Maybe we can
look together and fix the problem so I can use this wonderful computer
again!
You're coming though, are you?
Jeroen
MSX World
-----Oorspronkelijk bericht-----
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Hans Otten
Verzonden: maandag 17 september 2001 20:55
Aan: [EMAIL PROTECTED]
Onderwerp: Re: Problems with NMS8280 MSX 2 / 2+
It may be a 7 MHz upgrade that is malfunctioning.
Accessing the VDP on 7 MHz without switching back to 3.58 MHz might cause
these screen update errors. Especially when scrolling.
Open it and check for loose wires coming from the print above the cpu (if it
is a 7 MHz upgraded version.
More info on 8280 (userguide, service manual) and 7 MHz upgrade/MSX2+
upgrade on the website www.msxhans.msx2.com
Hans
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
--
For info, see http://www.stack.nl/~wynke/MSX/listinfo.html
