This was posted by Atalarum on the www.msx.org forum a while ago. Maybe someone here can help him?
~Grauw ---------------------------- Hi. I want to know how to dump Matsushita 12X12 Dot Kanji Rom for FS-4600F (MSX2) / FS-CM1 (MSX Modem) / FS-A1FM (MSX2 with Modem) But unfortunately, I forgot to dump Matsushita's 12X12 dot Kanji ROM. I found that that was my mistake. So I must dump 12X12 dot Kanji ROM (KANJI12.ROM) According to 12X12 dot Kanji ROM spec, this is within 128KB. (JIS 1st Class). This 12X12 dot Kanji is different from MSX's standard Kanji Font. MSX's standard Kanji can be accessed from I/O port D8 - D9h (JIS 1st) or D8 - DBh (JIS 1st+2nd). But maybe this Matsushita's Kanji uses special I/O port for Matsushita's machines. Matsushita's 12X12 dot Kanji was accepted by FS-4600F (MSX2) / FS-CM1 (MSX Modem) / FS-A1FM (MSX2 with Modem) KANJI.ROM is for Standard MSX Kanji (16X16dot) FS-4600F's Rom BIOS can be found from there. (Except KANJI12.ROM -- 128KB?) http://www.nic.funet.fi/pub/msx/emulator/system_roms/Japanese/MSX2/FS4600F.Z IP I think to dump(implement) 12X12 dot Kanji Rom (Matsushita's Specification Kanji), anyone must analysis the FS4600F3.ROM (1Mb). Because 12X12 dot Kanji Rom can be used when user run Layout Mode on Word Processor. So I think the access method of 12X12 dot Kanji can be found on FS4600F3.ROM. The main point is when you run 1.Word Processor (Japanese) and enter 1.(new), you can enter Japanese Word Processor. Then if you push F4 key, you can see Layout Menu 1.40XX 2.80XX. If you push 1 or 2, you can see the Layout Mode. But its Layout Mode can see 12X12 dot Kanji on Real FS-4600F. Unfortunately, FS4600F.ZIP doesn't have 12X12 dot Kanji Rom font. (KANJI12.ROM) This KANJI12.ROM is different from KANJI.ROM of course. So to find dumping method, maybe you must see FS4600F3.ROM detailly. For details you had better WA80-0.JPG / WA80-1.JPG / WA80-2.JPG WA80-1.JPG : Layout Menu (1.40 Letter / 2.80 Latter) -- OpenMSX WA80-0.JPG : Layout Mode (80 Latter) -- Original With 12X12 dot Kanji (shown correctly) -- FS-4600F (Real) WA80-2.JPG : Layout Mode (80 Latter) -- Original With 12X12 dot Kanji (doesn't shown correctly) -- OpenMSX You can find these pictures from here. ftp://ftp.members.interq.or.jp/ I found that if you launch FS-4600F with openMSX, you can see the menu 3.Jusho/Meishi 4.BASIC too. If you select 3, you can enter Jusho/Meishi. I tested this. But unfortunately Joshu/Meishi's layout mode can't be shown 12X12 dot Kanji too. I'll attach JUSHO-0.JPG / JUSHO-1.JPG Also I attached FNT-CM1*.* / K12.* FNT-*.* are the 12X12 Dot Kanji Rom Font Driver for DS2 System for Gigamix. http://www.gigamixonline.com/ds2/ http://www.gigamixonline.com/ds2/ds2drv_f.html It is very useful to make 12X12 Dot Kanji Rom's Dumping Tool. So, Kichi made K12.COM reference to FNT-CM1*.* But unfortunately it doesn't dump 12X12 Dot Kanji Rom correctly. (maybe) I think to make 12X12 dot Kanji Rom Dumping Tool, you had better see FS4600F3.ROM detailly. Can anyone make KANJI12.ROM dump utility? This is different from original 16X16 Dot Kanji Rom's. It can't be accessed through D8-DBH ~Grauw --- Ushiko-san! Kimi wa doushite, Ushiko-san nan da!! _______________________________________________ MSX mailing list ([EMAIL PROTECTED]) Info page: http://lists.stack.nl/mailman/listinfo/msx
