Hello all! I think it is a bit difficult, because all PSU of 2+ are on board... Try to replace the rectifiers diodes.
best regards, Daniel > AT PSU provides +/-5, +/-12 and ground. It's all your MSX needs. For sure you > should disconnect (and optionally remove) original PSU and find out what type of > voltage should go to MSX motherboard. But it shouldn't be too hard with all the > marks on PSU and motherboard, even with dead PSU, > > > > Replace it with a normal AT PSU. It's a good idea if you use SunRise IDE cart > > > :) > > > > > I thought of that but i am not skilled enough to put the correct connector > > to adapt it to a MSX2+. > > I don't know if a normal european AT PSU can do well with this japanese MSX. > _______________________________________________ > MSX mailing list ([EMAIL PROTECTED]) > Info page: http://lists.stack.nl/mailman/listinfo/msx > > _______________________________________________ MSX mailing list ([EMAIL PROTECTED]) Info page: http://lists.stack.nl/mailman/listinfo/msx
