Hi all,
I updated the documentation for the MSX-Audio BIOS upgrade for Philips Music Module on MSXpro ( http://www.msxpro.com )
Fixes: - The missing conection for the EPROM's A13 pin - The /CS signals for the EPROM and SRAM were swapped
I also want to clarify some misinterpretations that happened on the previous release: The MSX-Audio BIOS I released is generic. This means it can be used in *any* Y8950 based device that uses the default MSX ports (c0h/c1h and c2h/c3h) and not only on Philips MM as some assumed.
This BIOS is not programmed by me, since it's the original ASCII's BIOS that was included on the FS-CA1 ROM. I just splitted it from the rest of the ROM (music editor, demos, etc), removed the switch check and fixed a little initialization bug.
So, there was two releases on my previous announcement:
1) The generic MSX-Audio BIOS 2) The hardware upgrade kit to support it on the Philips Music Module
Regards, FRS
_______________________________________________ MSX mailing list (msx@stack.nl) Info page: http://lists.stack.nl/mailman/listinfo/msx
