I've reinstalled again to try and understand the correct installation procedure. When the shell opened I ran PACMAN -S BASH PACMAN MSYS2-RUNTIME, restarted the shell and ran PACMAN -SU. This told me there was nothing to do so I then ran PACMAN -SY followed by PACMAN -S --NEEDED FILESYSTEM MSYS2-RUNTIME BASH LIBREADLINE LIBICONV LIBARCHIVE LIBGPGME LIBCURL PACMAN NCURSES LIBINTL (as indicated on the wiki). I got the following:
3 [main] pacman (3300) C:msys64usrbinpacman.exe: *** fatal error - cygheap base mismatch detected - 0x1802E4400/0x1802F5400. This problem is probably due to using incompatible versions of the msys DLL. Search for msys-2.0.dll using the Windows Start->Find/Search facility and delete all but the most recent version. The most recent version *should* reside in x:msysbin, where 'x' is the drive on which you have installed the msys distribution. Rebooting is also suggested if you are unable to find another msys DLL. There is only one copy of MSYS-2.0.DLL which is in C:MSYS64USRBIN. Consequently I rebooted and ran PACMAN -S --NEEDED FILESYSTEM MSYS2-RUNTIME BASH LIBREADLINE LIBICONV LIBARCHIVE LIBGPGME LIBCURL PACMAN NCURSES LIBINTL again. It informed me "there is nothing to do". I then exited the shell, ran AUTOREBASE.BAT, started the shell again and ran PACMAN -SU. I got the following as before: error: failed to commit transaction (conflicting files) crypt: /usr/share/doc/MSYS/crypt.README exists in filesystem Errors occurred, no packages were upgraded. I then ran PACMAN -S CRYPT --FORCE which worked. Do I need all of those steps? On 2014-11-05 16:48, Alexey Pavlov wrote: >> 5 нояб. 2014 г., в 19:46, Dangthrimble <[email protected] [1]> написал(а): >> >> I've just run PACMAN -S BASH PACMAN MSYS2-RUNTIME, restarted MSYS2 and run PACMAN -S CRYPT --FORCE. I get: "error: target not found: --force" > Option is based with two '-' > >> On 2014-11-05 16:28, Dangthrimble wrote: >> >>> Based on my reading of the wiki, I thought when the terminal appeared at the end of the installation procedure I just had to close that window, restart MSYS2_SHELL.BAT and then just type PACMAN -SYU. >>> >>> So do I just run PACMAN -S BASH PACMAN MSYS2-RUNTIME, restart MSYS2, run PACMAN -S CRYPT --FORCE and then run PACMAN -SU? Can you point me at where this is described on the wiki? >>> >>> Thanks >>> >>> On 2014-11-05 16:20, Alexey Pavlov wrote: >>> >>>>> 5 нояб. 2014 г., в 19:15, Dangthrimble <[email protected] [2]> написал(а): >>>>> >>>>> I thought I installed MSYS2 incorrectly the first time as I got errors, however I have got them again: >>>>> >>>>> $ pacman -Syu >>>>> :: Synchronising package databases... >>>>> mingw32 >>>>> mingw32.sig >>>>> mingw64 >>>>> mingw64.sig >>>>> msys >>>>> msys.sig >>>>> :: Starting full system upgrade... >>>>> :: Replace getopt with msys/util-linux? [Y/n] y >>>>> resolving dependencies... >>>>> looking for conflicting packages... >>>>> >>>>> Packages (67) bash-4.3.030-3 bash-completion-2.1-4 bsdcpio-3.1.2-4 >>>>> bsdtar-3.1.2-4 bzip2-1.0.6-2 catgets-1.1-2 crypt-1.1-5 >>>>> curl-7.38.0-4 file-5.20-1 filesystem-2014.10-4 >>>>> findutils-4.5.14-2 flex-2.5.39-3 gawk-4.1.1-2 gcc-libs-4.9.2-3 >>>>> gdbm-1.11-2 getopt-1.1.5-1 [removal] gettext-0.18.3.2-4 >>>>> gmp-6.0.0-3 gnupg-1.4.18-2 groff-1.22.2-3 heimdal-libs-1.5.3-4 >>>>> info-5.2-5 less-470-1 libarchive-3.1.2-4 >>>>> libasprintf-0.18.3.2-4 libassuan-2.1.2-2 libbz2-1.0.6-2 >>>>> libcares-1.10.0-2 libcatgets-1.1-2 libcrypt-1.1-5 >>>>> libcurl-7.38.0-4 libexpat-2.1.0-2 libffi-3.0.13-2 >>>>> libgdbm-1.11-2 libgettextpo-0.18.3.2-4 libgpg-error-1.12-3 >>>>> libgpgme-1.5.1-2 libiconv-1.14-2 libidn-1.29-3 >>>>> libintl-0.18.3.2-4 liblzma-5.0.7-2 liblzo2-2.08-2 >>>>> libmetalink-0.1.2-2 libnettle-3.0-2 libopenssl-1.0.1.j-2 >>>>> libpipeline-1.4.0-1 libreadline-6.3.008-3 libsqlite-3.8.7-1 >>>>> libssh2-1.4.3-2 libtasn1-4.2-3 libutil-linux-2.24.2-1 >>>>> libxml2-2.9.2-1 m4-1.4.17-3 mintty-1322-2 mpfr-3.1.2.p10-2 >>>>> msys2-keyring-r7.2bc509b-1 msys2-runtime-2.0.16344.77f8ff8-1 >>>>> ncurses-5.9.20141101-1 openssl-1.0.1.j-2 >>>>> pacman-4.1.2.5864.dcef251-1 sed-4.2.2-2 texinfo-5.2-5 >>>>> tzcode-2014.i-1 util-linux-2.24.2-1 which-2.20-2 xz-5.0.7-2 >>>>> zlib-1.2.8-3 >>>>> >>>>> Total Download Size: 26.82 MiB >>>>> Total Installed Size: 132.26 MiB >>>>> Net Upgrade Size: 35.64 MiB >>>>> >>>>> :: Proceed with installation? [Y/n] y >>>>> :: Retrieving packages ... >>>>> msys2-runtime-2.0.1... 2.2 MiB 341K/s 00:07 [######################] 100% >>>>> bash-4.3.030-3-x86_64 1863.5 KiB 342K/s 00:05 [######################] 100% >>>>> gcc-libs-4.9.2-3-x86_64 646.7 KiB 343K/s 00:02 [######################] 100% >>>>> libiconv-1.14-2-x86_64 534.0 KiB 341K/s 00:02 [######################] 100% >>>>> libintl-0.18.3.2-4-... 17.1 KiB 350K/s 00:00 [######################] 100% >>>>> ncurses-5.9.2014110... 1101.6 KiB 344K/s 00:03 [######################] 100% >>>>> libreadline-6.3.008... 243.2 KiB 347K/s 00:01 [######################] 100% >>>>> bash-completion-2.1... 154.5 KiB 336K/s 00:00 [######################] 100% >>>>> libbz2-1.0.6-2-x86_64 25.3 KiB 288K/s 00:00 [######################] 100% >>>>> libgettextpo-0.18.3... 92.4 KiB 380K/s 00:00 [######################] 100% >>>>> libasprintf-0.18.3.... 3.4 KiB 0.00B/s 00:00 [######################] 100% >>>>> gettext-0.18.3.2-4-... 1327.3 KiB 340K/s 00:04 [######################] 100% >>>>> liblzma-5.0.7-2-x86_64 62.4 KiB 281K/s 00:00 [######################] 100% >>>>> liblzo2-2.08-2-x86_64 56.2 KiB 325K/s 00:00 [######################] 100% >>>>> gmp-6.0.0-3-x86_64 357.0 KiB 344K/s 00:01 [######################] 100% >>>>> libnettle-3.0-2-x86_64 90.9 KiB 330K/s 00:00 [######################] 100% >>>>> zlib-1.2.8-3-x86_64 41.5 KiB 433K/s 00:00 [######################] 100% >>>>> libxml2-2.9.2-1-x86_64 483.7 KiB 342K/s 00:01 [######################] 100% >>>>> bsdcpio-3.1.2-4-x86_64 238.9 KiB 338K/s 00:01 [######################] 100% >>>>> bsdtar-3.1.2-4-x86_64 254.5 KiB 340K/s 00:01 [######################] 100% >>>>> bzip2-1.0.6-2-x86_64 52.0 KiB 321K/s 00:00 [######################] 100% >>>>> libcatgets-1.1-2-x86_64 4.4 KiB 547K/s 00:00 [######################] 100% >>>>> catgets-1.1-2-x86_64 21.4 KiB 289K/s 00:00 [######################] 100% >>>>> libcrypt-1.1-5-x86_64 4.1 KiB 451K/s 00:00 [######################] 100% >>>>> crypt-1.1-5-x86_64 4.4 KiB 550K/s 00:00 [######################] 100% >>>>> less-470-1-x86_64 88.1 KiB 330K/s 00:00 [######################] 100% >>>>> info-5.2-5-x86_64 191.5 KiB 335K/s 00:01 [######################] 100% >>>>> libidn-1.29-3-x86_64 166.0 KiB 361K/s 00:00 [######################] 100% >>>>> libexpat-2.1.0-2-x86_64 47.0 KiB 427K/s 00:00 [######################] 100% >>>>> libmetalink-0.1.2-2... 20.5 KiB 293K/s 00:00 [######################] 100% >>>>> libopenssl-1.0.1.j-... 762.3 KiB 343K/s 00:02 [######################] 100% >>>>> openssl-1.0.1.j-2-x... 1231.5 KiB 340K/s 00:04 [######################] 100% >>>>> findutils-4.5.14-2-... 452.3 KiB 352K/s 00:01 [######################] 100% >>>>> sed-4.2.2-2-x86_64 671.9 KiB 343K/s 00:02 [######################] 100% >>>>> libffi-3.0.13-2-x86_64 21.4 KiB 281K/s 00:00 [######################] 100% >>>>> libtasn1-4.2-3-x86_64 89.2 KiB 330K/s 00:00 [######################] 100% >>>>> libgdbm-1.11-2-x86_64 20.3 KiB 614K/s 00:00 [######################] 100% >>>>> gdbm-1.11-2-x86_64 108.2 KiB 373K/s 00:00 [######################] 100% >>>>> texinfo-5.2-5-x86_64 936.7 KiB 343K/s 00:03 [######################] 100% >>>>> libssh2-1.4.3-2-x86_64 151.9 KiB 365K/s 00:00 [######################] 100% >>>>> libcurl-7.38.0-4-x86_64 163.9 KiB 336K/s 00:00 [######################] 100% >>>>> libsqlite-3.8.7-1-x... 398.1 KiB 342K/s 00:01 [######################] 100% >>>>> heimdal-libs-1.5.3-... 585.4 KiB 342K/s 00:02 [######################] 100% >>>>> libcares-1.10.0-2-x... 81.5 KiB 341K/s 00:00 [######################] 100% >>>>> curl-7.38.0-4-x86_64 481.1 KiB 350K/s 00:01 [######################] 100% >>>>> file-5.20-1-x86_64 370.6 KiB 341K/s 00:01 [######################] 100% >>>>> filesystem-2014.10-... 18.8 KiB 289K/s 00:00 [######################] 100% >>>>> m4-1.4.17-3-x86_64 200.3 KiB 360K/s 00:01 [######################] 100% >>>>> flex-2.5.39-3-x86_64 820.7 KiB 345K/s 00:02 [######################] 100% >>>>> mpfr-3.1.2.p10-2-x86_64 223.2 KiB 359K/s 00:01 [######################] 100% >>>>> gawk-4.1.1-2-x86_64 909.9 KiB 345K/s 00:03 [######################] 100% >>>>> libutil-linux-2.24.... 78.9 KiB 330K/s 00:00 [######################] 100% >>>>> util-linux-2.24.2-1... 1138.2 KiB 347K/s 00:03 [######################] 100% >>>>> gnupg-1.4.18-2-x86_64 1001.3 KiB 344K/s 00:03 [######################] 100% >>>>> groff-1.22.2-3-x86_64 1709.9 KiB 327K/s 00:05 [######################] 100% >>>>> libarchive-3.1.2-4-... 233.4 KiB 340K/s 00:01 [######################] 100% >>>>> libgpg-error-1.12-3... 52.5 KiB 315K/s 00:00 [######################] 100% >>>>> libassuan-2.1.2-2-x... 80.2 KiB 283K/s 00:00 [######################] 100% >>>>> libgpgme-1.5.1-2-x86_64 171.7 KiB 337K/s 00:01 [######################] 100% >>>>> libpipeline-1.4.0-1... 25.7 KiB 298K/s 00:00 [######################] 100% >>>>> mintty-1322-2-x86_64 86.1 KiB 325K/s 00:00 [######################] 100% >>>>> msys2-keyring-r7.2b... 15.2 KiB 0.00B/s 00:00 [######################] 100% >>>>> which-2.20-2-x86_64 16.6 KiB 282K/s 00:00 [######################] 100% >>>>> xz-5.0.7-2-x86_64 118.2 KiB 333K/s 00:00 [######################] 100% >>>>> pacman-4.1.2.5864.d... 3.2 MiB 342K/s 00:10 [######################] 100% >>>>> tzcode-2014.i-1-x86_64 276.3 KiB 341K/s 00:01 [######################] 100% >>>>> (66/66) checking keys in keyring [######################] 100% >>>>> (66/66) checking package integrity [######################] 100% >>>>> (66/66) loading package files [######################] 100% >>>>> (66/66) checking for file conflicts [######################] 100% >>>>> error: failed to commit transaction (conflicting files) >>>>> crypt: /usr/share/doc/MSYS/crypt.README exists in filesystem >>>>> Errors occurred, no packages were upgraded. >>>> First if you read our wiki, you need install soma packages to prevent fork errors: >>>> pacman -S bash pacman msys2-runtime >>>> Then restart MSYS2 >>>> To solve your error do >>>> pacman -S crypt --force >>>> Then update all other packages: >>>> pacman -Su >>>> >>>>> On 2014-11-05 16:01, Dangthrimble wrote: >>>>> >>>>>> Thanks. That sorted it. >>>>>> >>>>>> On 2014-11-05 15:57, Alexey Pavlov wrote: >>>>>> >>>>>>>> 5 нояб. 2014 г., в 18:56, Dangthrimble <[email protected] [3]> написал(а): >>>>>>>> >>>>>>>> I get the same dialog box: >>>>>>> Restart Windows and run it again. >>>>>>> >>>>>>>> On 2014-11-05 15:53, Alexey Pavlov wrote: >>>>>>>> >>>>>>>>>> 5 нояб. 2014 г., в 18:44, Dangthrimble <[email protected] [4]> написал(а): >>>>>>>>>> >>>>>>>>>> C:msys64>dir *.exe /b >>>>>>>>>> maintenancetool.exe >>>>>>>>> Run it) >>>>>>>>> >>>>>>>>>> On 2014-11-05 15:40, Alexey Pavlov wrote: >>>>>>>>>> >>>>>>>>>>>> 5 нояб. 2014 г., в 18:39, Dangthrimble <[email protected] [5]> написал(а): >>>>>>>>>>>> >>>>>>>>>>>> I can't find maintenance.exe in "C:msys64". Do you mean a different folder and, if so, where will I find it? >>>>>>>>>>> Show you exe files in this folder. >>>>>>>>>>> >>>>>>>>>>>> Thanks >>>>>>>>>>>> >>>>>>>>>>>> On 2014-11-05 15:27, Alexey Pavlov wrote: >>>>>>>>>>>> >>>>>>>>>>>>>> 5 нояб. 2014 г., в 18:10, Dangthrimble <[email protected] [6]> написал(а): >>>>>>>>>>>>>> >>>>>>>>>>>>>> I have just downloaded and installed MSYS2 for the first time but I'm not sure everything went smoothly. I am trying to re-install MSYS2 but when I attempt to uninstall it I get a dialog box that states "Another maintenancetool instance is already running. Wait until it finishes, close it, or restart your system." I could find no evidence of any maintenancetool and got the same dialog box even after a system restart. Can someone advise what I need to do to get beyond this point? >>>>>>>>>>>>> This is bug in installer. Please run maintenance.exe from msys installation folder. >>>>>>>>>>>>> Regards, >>>>>>>>>>>>> Alexey. >>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks ------------------------------------------------------------------------------ >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Msys2-users mailing list >>>>>>>>>>>>>> [email protected] [7] >>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/msys2-users [8] Links: ------ [1] mailto:[email protected] [2] mailto:[email protected] [3] mailto:[email protected] [4] mailto:[email protected] [5] mailto:[email protected] [6] mailto:[email protected] [7] mailto:[email protected] [8] https://lists.sourceforge.net/lists/listinfo/msys2-users
------------------------------------------------------------------------------
_______________________________________________ Msys2-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/msys2-users
