Actually, it's on the network cause I can sftp directly to it ... but my sync still isn't working :(
On Tue, 2003-12-16 at 16:25, Dan Sawyer wrote:
Kelly,
I find that my Zaurus is fickle; the network connection does not always come up. If I unplug the USB and re-install it hotplug on the Zaurus will pick it up and re-start the network.
Try pinging the Zaurus to make sure the lan is up.
Dan
Kelly wrote:
I upgraded Multisync and my plugins to .81
The first time I plugged in my Z, I acknowledged a screen that asked if it was ok to connect, I pushed yes. Now Multisync has the following in the log file:
"Failed to connect remote: Failed to load data from device 192.168.129.201"
I tried deleting addressbook.xml and the command line showed that it couldn't find the .xml file. After creating it I still had the same problem above (Failed to load).
When I just let Multisync go from the command line, at first it comes up with fetching all the files ... todo, addressbk, datebk & categories and then it just goes to fetching the addressbk. At this time my Z will say that it's syncing too. There are .xml files in my /tmp directory but no data is exchanged.
Kelly
On Thu, 2003-12-04 at 18:37, Tom Foottit wrote:
So the sync is working successfully and the data is in the files on your
Zaurus, but the PIM applications are not showing any data?
What are you running on your Z - Opie/OpenZaurus or the Sharp ROM, and
what version? Are the PIM apps quickloaded, and if so are you using the
QCop option in the Opie plugin config?
Tom
On Thu, 4 Dec 2003, Kelly wrote:
> I have my sync working with my Z, but when I go into my addy bk or
> contacts there is nothing there. I've even deleted the .xml files in
> Applications, resynced, checked that the files are there, but still
> nothing comes up in the application. I've also opened the file up
> completely (777) with no luck.
>
> TIA!
> Kelly
>
|
