On Fri, 2004-12-24 at 11:57, Matthias BlÃsing wrote: > Am Do, den 23.12.2004 schrieb Christoph Lukas um 21:18: > > > Same here. Might the vcard version be a problem? I saw > > > > Body: BEGIN:VCARD > > VERSION:2.1 > > > > when syncing S55=>Evo > > > > and > > > > Body: BEGIN:VCARD > > VERSION:3.0 > > > > when syncing Evo=>S55. Might it be possible that the S55 does not > > understand Vcard version 3? > > That might be a good starting point. It would correlate quite well with > the fact, that each end of the pair S55(via IRMC)-Evo2 works very well > (tested with the Backup Plugin) individually. > > So the question is - what can we do? A compatibility layer in IRMC or in > Evo2? One Option is to convert vcards comming from Evo2 from Version 3.0 > to 2.1 or covert vcards from IRMC the other way round. > > For my part I would be happy with a hack, making my S55 work with Evo2. > I found a perl script for converting vcard 3.0 to 2.1, but it seemed a > little bit to easy. AND what's makes it worse is, that I not a skilled > C-Programmer (meaning I only used C for _some_ homework for my system > programming lecture at university). > > One question remains. Isn't there a internal standard format - or at > least shouldn't one be agreed on? I can't think, that the S55 is the > only device not understanding Vcard 3.0 and Evo2 won't be the only > application providing Vcard 3.0.
Yes a internal standard should be defined, so that we can sync vcard3.0 <-> intenal format <-> vcard2.1 The problem with evo2 is also that it can only produce 3.0 vcards. When you request 2.1 cards from evo it just says "not implemented yet" > > Thanks > > Matthias ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Multisync-users mailing list Multisync-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/multisync-users
