Hi,
The first card is an 2 Wire Bus Protocol card, that
requires a PIN to be writen. Also the first 32 bytes
of data use to be write protected. That's why the
memory is unmodified and you get 62 0.
The second card (M16) is I2C. It does not require PIN
and it's not write protected and so it worked.
--- Michael_Kl�ne <[EMAIL PROTECTED]> wrote:
> Hello,
>
> thank you for the prompt answer!
> Now it�s getting real strange... I�ve got two
> Chipcard-Readers from
> Towitoko. One for my Homebanking and one from the
> Linuxpack. For some
> reason, these two behave different when reading the
> card. Maybe, the card is
> damaged??? The hanging could not be reproduced,
> maybe because of the system
> boot. The command I tried was:
>
> # echo "testing..." | smartcard -w
>
> With my other Card-Reader (also Chipdrive micro 120
> V4.30 connected to COM1)
> the result is now:
>
> nathan# smartcard -i
> Terminal Manufacturer: DETWK
> Terminal Model: CDM
> Terminal Revision: 2.0.7
> Card Status: Card Inserted (connected)
> ATR Protocol: 2W
> ATR Structure Ident: common use
> ATR Read Error Flag: defined length
> ATR Memory Size: 256 blocks, 8 bits wide = 256 bytes
> ATR DIR: valid
> Answer To Reset (ATR): A2 13 10 91
>
> nathan# smartcard -r --debug | hexdump -v
> debug: size is 255
> debug: ctbcs_request_icc(0,0,...) = 0, lenr=2
> debug: response trail = 90 0
> debug: iso_select_file(0,0x0,0x3F00) = 0, lenr=2
> debug: response trail = 90 0
> debug: read_data(0,...,255,0) reading one chunk
> debug: iso_read_binary(0,0,...,255) = 0, lenr=257
> debug: copying 255 bytes to user buffer
> debug: response trail = 90 0
> debug: smartcard_read_data() returned 255
> debug: fwrite() returned 255
> 0000000 13a2 9110 e581 1581 e025 f8d1 c3e0 5d3c
> 0000010 3641 4957 d254 0076 0400 4300 5241 c1a0
> 0000020 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000030 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000040 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000050 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000060 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000070 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000080 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000090 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000a0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000b0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000c0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000d0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000e0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000f0 ffff ffff ffff ffff ffff ffff ffff 00ff
>
> nathan# echo "testing..." | smartcard -w --debug
> debug: size is 255
> debug: ctbcs_request_icc(0,0,...) = 0, lenr=2
> debug: response trail = 90 0
> debug: fread() returned 11
> debug: writing 11 bytes of data
> debug: iso_select_file(0,0x0,0x3F00) = 0, lenr=2
> debug: response trail = 90 0
> debug: write_data(0,...,11,0) writing one chunk
> debug: iso_update_binary(0,0,...,11) = 0, lenr=2
> debug: response trail = 62 0
>
> nathan# smartcard -r --debug | hexdump -v
> debug: size is 255
> debug: ctbcs_request_icc(0,0,...) = 0, lenr=2
> debug: response trail = 90 0
> debug: iso_select_file(0,0x0,0x3F00) = 0, lenr=2
> debug: response trail = 90 0
> debug: read_data(0,...,255,0) reading one chunk
> debug: iso_read_binary(0,0,...,255) = 0, lenr=257
> debug: copying 255 bytes to user buffer
> debug: response trail = 90 0
> debug: smartcard_read_data() returned 255
> debug: fwrite() returned 255
> 0000000 13a2 9110 e581 1581 e025 f8d1 c3e0 5d3c
> 0000010 3641 4957 d254 0076 0400 4300 5241 c1a0
> 0000020 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000030 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000040 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000050 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000060 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000070 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000080 ffff ffff ffff ffff ffff ffff ffff ffff
> 0000090 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000a0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000b0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000c0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000d0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000e0 ffff ffff ffff ffff ffff ffff ffff ffff
> 00000f0 ffff ffff ffff ffff ffff ffff ffff 00ff
>
> Now i tried another Card ("Chipkarte M16"). This one
> works without problem.
> I can read, write and erase all Data in it.
>
> nathan# smartcard -i
> Terminal Manufacturer: DETWK
> Terminal Model: CDM
> Terminal Revision: 2.0.7
> Card Status: Card Inserted (connected)
> ATR Protocol: I2C
> ATR Structure Ident: common use
> ATR Read Error Flag: defined length
> ATR Memory Size: 2048 blocks, 8 bits wide = 2048
> bytes
> ATR DIR: valid
> Answer To Reset (ATR): 82 2B 10 84
>
> Mk
> ----- Original Message -----
> From: "Carlos Prados" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Saturday, September 21, 2002 10:01 PM
> Subject: Re: [Muscle] Towitoko Linuxpack, Memorycard
>
>
> > Hi,
> >
> > Using version 2.0.7, could you send us the output
> of
> > the command `smartcard -i`, to see which card is
> > causing you problems?
> >
> > Also could you provide the exact command you type
> to
> > store data that leaves you hanged? Remember that
> > smartcard -w expects data on standatd input and
> will
> > hang until it gets something there to be writen.
> >
> > Thanks,
> > Carlos.
> >
> > --- Michael_Kl�ne <[EMAIL PROTECTED]>
> wrote:
> > > Hello all,
> > >
> > > for some reason, there is no way to store Data
> in
> > > one of the two Memorycards shipped with the
> > > Linuxpack from Towitoko. I did try the
> "original"
> > > Version of the Chipdriver on the CD, also the
> > > current Version 2.0.7.
> > >
> > > Reading does work, for example the output of the
> > > program smartcard (256 Byte Memory):
> > >
> > > nathan# ./smartcard -r --debug | hexdump -v
> > > debug: size is 255
> > > debug: ctbcs_request_icc(0,0,...) = 0, lenr=2
> > > debug: response trail = 90 0
> > > debug: iso_select_file(0,0x0,0x3F00) = 0, lenr=2
> > > debug: response trail = 90 0
> > > debug: read_data(0,...,255,0) reading one chunk
> > > debug: iso_read_binary(0,0,...,255) = 0,
> lenr=257
> > > debug: copying 255 bytes to user buffer
> > > debug: response trail = 90 0
> > > debug: smartcard_read_data() returned 255
> > > debug: fwrite() returned 255
> > > 0000000 13a2 9110 e581 1581 e025 f8d1 c3e0 5d3c
> > > 0000010 3641 4957 d254 0076 0400 4300 5241 c1a0
> > > 0000020 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000030 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000040 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000050 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000060 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000070 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000080 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 0000090 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000a0 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000b0 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000c0 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000d0 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000e0 ffff ffff ffff ffff ffff ffff ffff ffff
> > > 00000f0 ffff ffff ffff ffff ffff ffff ffff 00ff
> > >
> > > But when I try to store Data, the program
> hangs...
> > >
> > > The test-tool from towitoko also does not write
> > > anything into the card.
> > > It does not hang, but the data isn�t changed.
> > >
> > > What am I doing wong???
> > >
> > > Mk
> > >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > New DSL Internet Access from SBC & Yahoo!
> > http://sbc.yahoo.com
> > _______________________________________________
> > Muscle mailing list
> > [EMAIL PROTECTED]
> >
> http://lists.musclecard.com/mailman/listinfo/muscle
> >
> >
> >
>
>
> _______________________________________________
> Muscle mailing list
> [EMAIL PROTECTED]
> http://lists.musclecard.com/mailman/listinfo/muscle
__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
_______________________________________________
Muscle mailing list
[EMAIL PROTECTED]
http://lists.musclecard.com/mailman/listinfo/muscle
