Try using a GemPC400 driver one version older. I had a similar problem using the GemPC410 reader and I had to use version 0.6.4 of the driver, as 0.6.5 driver was giving me the establishconnection failed error.
-- Tammy
At 04:06 PM 11/7/2002 +0800, you wrote:
Hi all, I have encountered a problem communicating with a Gemplus Pro R3 card using a GemPC400 PCMCIA reader ? The GemPC400 reader has no problem reading 211PK-IS card.I also tried reading the Pro R3 card with SCR331 USB reader, and it works. It seems like the GemPC400 driver/hw doesn't work well with the Pro R3 card. When I tried to 'connect 1' using MuscleTool to my GemPlus Pro R3 card using the GemPC400 READER, it reports 'establishconnection failed or token unsupported'. When I trace the debug for the IFDHTransmitToICC, the status is 0xa2 for the Pro R3 card. Sometimes, it works. Has anyone encounter similar problem? Thank you. Note: 1. OS - Linux 2.4.18 (Redhat) 2. PCSC-Lite - 1.1.1 3. Muscleframe - 1.1.3 4. Ifdgpr400 - 0.3 Best Regards, Paul Tan Senior R&D Engineer,
================================================== Tammy M. Blaser NASA John H. Glenn Research Center Flight Software Engineering Organization 7750 Mail stop 86-11 216-433-2699 (office) 216-433-8269 (fax) [EMAIL PROTECTED] ================================================== _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.musclecard.com/mailman/listinfo/muscle
