Hi, find after my feedbacks on my problems : > 1) I can't load the Muscle Applet on my GXP_211PK on Linux with the > GemXPressoRADIII using the GemPC410 reader (using the OCF to PCSC bridge). > The loading works fine on Windows. I have not solved this problem for the GemPC410. But now with the GPR400 and the modified driver it works. I can load the Muscle Applet ! :-)
> 2) The loading is successfull on Windows. But I can't create the instance > (see ERROR_2BIS). It seems there is a timeout. If I try to instance the > applet on Linux I have a problem (see the log ERROR_2). Now on Linux I can create the instance. I think my problem was that the card I used have some troubles. It was a test card and perhaps there is some unreacheable objects in the EEPROM and not enough space to create the instance. This may explain the problems. I tested the instance successfully on an other GXP211PK with the GPR400. With the GemPC410, the RADIII gives the following error but the instance is done. CMD: InstallApplication -> 80 E6 0C 00 1D 07 00 11 22 33 44 55 AA 08 00 11 22 33 44 55 AA 01 08 00 11 22 33 44 55 AA 01 00 00 00 00 <- 6E 00 *** ??? : OP.error.E6.6E00 I have the feeling that it was a problem of timeout and if the reader can wait a little there is no problem. > 3) An other problem occurs on Linux when I try with the GemXPressoRADIII to > authenticate on the GXP211_PK using the GPR400 reader or the SCM SCR 331 > (using the OCF to PCSC bridge). > For the error see the log ERROR_3. The problem was identified by JL Giraud. I corrected this bug for the GPR400 but not for the SCM SCR 331. > 4) To confirm the problem above I have tested on Linux the readers with a > JCOP20 Card and opensc-tool which use PC/SC Lite. > I try to select the CardManager (aid = A000000003000000) and I have the > output (see log ERROR_4). > It works fine with the GemPC410 but not with the SCM SCR331 and GPR400. > I have the same problem if I use the JCShell which use the JPC/SC library. Perhaps a problem because the card is T=1 ? > 5) My last problem is not very important but often when I connect my GemPC410 > the first time I start pcscd the reader is not detect. I must kill pcscd and > restart it. > I have not the log here. But if someone have an idea I am interesting. With the version 0.8.0 of the drivers the problem was solved. Thanks for all people who have search some solutions of these problems. The work to do is : Supporting the chaining Get Response in the SCM SRC331. Solving the support of card T=1 for the SCM SRC331 and GPR400. Increasing the timeout of the GemPC410 ??? (Perhaps this is the solution for a problem above) Identify why I can't load the Muscle Applet on the GXP211_PK with the GemPC410. Best regards, Damien Sauveron ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/ _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.musclecard.com/mailman/listinfo/muscle
