Hi Ludovic, Thank you very much for your help.
> It surprise me. This missing "/" bug was corrected before the 1.2.0 > release. See [1] for the patch. Can you remove your installed pcsc-lite > and install an _official_ 1.2.0 version ? In hotplug_linux.c line 129, it needs a slash. Pls check. > I also see: >> hotplug_linux.c:179 Disabling USB support for pcscd > > So I imagine your GemPC Twin is _not_ USB but connected to a serial > port. Right? Yes, I used the serial port instead of USB. Does it make any difference? >> But what is the reason of "commands.c:335 Procedure >> byte conflict"? > > This error message occurs when you use a T=1 card in TPDU mode. This is > not supported in libccid 0.3.2 (I am working on it). And your card is a > T=1 card (according to the ATR). I already commented the "#if 0" and "#endif" in ccid-0.3.2/src/ccid.c. But when I try to format the token, I got the "Formatting token [***] : Failed (Unknown SW: 6F00)" message. But I can CONNECT the token after that, and cannot verify the PIN. Pls see following log. > How did you load the applet? Using this reader under GNU/Linux? Using Windows? Because I could not load the applet under Linux due to missing a libjct.so in IBM JCOP Tools 2.2, I loaded the applet by using MicroExperts' jcop-musclecard under Windows. Thank you very much again. Bo Wu ifdhandler.c:320 entering IFDHPowerICC (lun: 0) eventhandler.c:466 EHSpawnEventHandler: Card inserted into Generic Reader 0 0 EHSpawnEventHandler: Card ATR: 3B E6 00 FF 81 31 FE 45 4A 43 4F 50 30 33 07 winscard_msg.c:250 SHMProcessEvents: Common channel packet arrival pcscdaemon.c:144 SVCServiceRun: Client 8 has disappeared. winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard.c:80 SCardEstablishContext: Establishing Context: 16987629 winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard.c:149 SCardConnect: Attempting Connect to Generic Reader 0 0 winscard.c:245 SCardConnect: Active Protocol: 2 winscard.c:252 SCardConnect: hCard Identity: 1a552 winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard.c:1293 SCardTransmit: Send Protocol: 1 APDU: 00 A4 04 00 06 A0 00 00 00 01 01 ifdhandler.c:416 entering IFDHTransmitToICC (lun: 0) SW: 90 00 winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard.c:1293 SCardTransmit: Send Protocol: 1 APDU: B0 2A 00 00 38 08 4D 75 73 63 6C 65 30 30 04 01 08 30 30 30 30 30 30 30 30 08 30 30 30 30 30 30 30 30 05 02 08 30 30 30 30 30 30 30 30 08 30 30 30 30 30 3 0 30 30 00 00 1B B8 00 02 01 ifdhandler.c:416 entering IFDHTransmitToICC (lun: 0) SW: 6F 00 winscard_msg.c:289 SHMProcessEvents: correctly processed client: 0 winscard.c:641 SCardDisconnect: Active Contexts: 1 ifdhandler.c:320 entering IFDHPowerICC (lun: 0) winscard.c:703 SCardDisconnect: Reset complete. ####################################################### muscle > tokens 1. IBM JCOP 30 muscle > format 1 Would you like to: 1. Use the default factory key: 2C15E526E93E8A19 2. Use the MUSCLE default key : 4D7573636C653030 3. Enter your own transport key Choose (1-3): 2 How much object memory would you like to allocate ? Example: 7096 (7k) : 7096 Please enter a new auth pin value (pin 0) : 00000000 Please enter your user pin value (pin 1) : 00000000 Please enter your user pin unblock value : 00000000 Please enter your number of pin tries : 5 ********************* WARNING ! ********************* You are about to destroy all data on this token. ***************************************************** Current admin pin : Muscle00 New admin pin : 00000000 New user pin : 00000000 New user unblock pin : 00000000 Number of tries : 5 Object memory : 7096 Are you sure you want to continue ? (1-YES, 2-NO): 1 Formatting token [***] : Failed (Unknown SW: 6F00) muscle > muscle > _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.musclecard.com/mailman/listinfo/muscle
