Try the following: % /usr/local/sbin/pcscd -c /etc/reader.conf --debug stdout
make sure the LIBPATH in reader.conf points to where u want it to point to and the channel id is correct good luck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jonathan Sabo (Contractor) Sent: Tuesday, June 29, 2004 11:29 AM To: [EMAIL PROTECTED] Subject: [Muscle] help with schlumberger usb setup Hello list, I am trying to setup m.u.s.c.l.e with a schlumberger 32kv2 card and an activcard card reader. I have this : ccid-0.4.1 pcsc-lite-1.1.1-1-redhat.i386.rpm ccid-0.4.1.tar.gz slb_rf72 libusb-0.1.7-5.i686.rpm slb_rf72-drv-1.1.0.tar.gz libusb-devel-0.1.7-5.i686.rpm slb_rfUSB muscleframework-1.1.3 slb_rfUSB-drv-0.9.0.tar.gz muscleframework-1.1.3.tar.gz Initially I compiled the pcsc-lite from source but I was having trouble so I used the rpm shown above. My card reader is a usb cardreader so I should be using either the ccid or slb_rfUSB bundles but pcsc-lite always reads /etc/reader.conf and looks for the bundle listed in the file. How do i make it use the usb bundle? [EMAIL PROTECTED] CACCARDS]# /usr/local/sbin/pcscd --debug stdout pcscdaemon.c:258 main: debug messages to stdout readerfactory.c:1317 RFInitializeReader: Attempting startup of Schlumberger Reflex 72 0 0. dyn_unix.c:32 DYN_LoadLibrary: dlerror() reports /usr/lib/libslb_rf72.so: cannot open shared object file: No such file or directory readerfactory.c:219 RFAddReader: Schlumberger Reflex 72 init failed. pcscdaemon.c:413 main: pcsc-lite daemon ready. pcscdaemon.c:470 Preparing for suicide winscard_msg.c:247 SHMProcessEvents: Select returns with failure: Interrupted system callpcscdaemon.c:174 SVCServiceRun: Error in SHMProcessEvents readerfactory.c:1610 RFCleanupReaders: entering cleaning function pcscdaemon.c:438 at_exit: cleaning /tmp/pcsc You can see above it is reading the /etc/reader.conf and expecting a serial cardreader, unfortunatly thats not what I have. I would like to use these bundles: /usr/local/pcsc/drivers/ifd-ccid.bundle/Contents/Linux/libccid.so.0.4.1 or /usr/local/pcsc/drivers/slbReflexUSB.bundle/Contents/Linux/reflex_usb How do I configure that? Thanks, Jonathan _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.drizzle.com/mailman/listinfo/muscle _______________________________________________ Muscle mailing list [EMAIL PROTECTED] http://lists.drizzle.com/mailman/listinfo/muscle
