Le Wednesday 27 April 2005 � 01:31:34, mail mail a �crit: > hello, Hi,
> I have successed install USB driver + pcsc lite under RH 9(kernel > 2.4). Now I want to try to install PCMCIA driver, but I can't handle. > > I use Infineer LT4000(PCMCIA). Here is some info output by "lspci -v" > 00:03.0 CardBus bridge: Texas Instruments PCI1420 > 00:03.1 CardBus bridge: Texas Instruments PCI1420 > > I plug LT4000 on slot 1 and copy libLT4000.so into > /usr/local/pcsc/drivers dir and /etc/reader.conf has the following > content: > > FRIENDLYNAME "INFINEER LT4000" > DEVICENAME /dev/ttyS0 > LIBPATH /usr/local/pcsc/drivers/libLT4000.so > CHANNELID 0x000001 > > When I run "cat /var/lib/pcmcia/stab", the input is : > Socket 0:CardBus hotplug device > Socket 1:LT4000 Mako Technologies Smart Card Reader > > But when I run "/usr/local/pcsc/sbin/pcscd -f -d stdout", the input is : > ...... > readerfactory.c:897:RFBindFunctions Loading IFD Handler 2.0 > Unable to open : No such file or directory > readerfactory.c:1090:RFInitializeReader Open Port 1 Failed (/dev/ttyS0) > ...... > > I wonder what file I miss and what port I should use in /etc/reader.conf. If the driver does not use the DEVICENAME port information you can use /dev/null Bye, -- Dr. Ludovic Rousseau [EMAIL PROTECTED] -- Normaliser Unix c'est comme pasteuriser le camembert, L.R. -- _______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
