Hi Dr. Rousseau, thank you very much for your hint. I downloaded and installed your driver (no errors), removed the "original" SDI010 driver, and startet everything up. The driver loads nicely, and pcscd shows a response as soon as I place a card on the reader.
Observation: The ATRs displayed are different, depending on which reader I place my card. ---- ATR from CardMan 5121 : --------- Apr 24 13:21:43 wks00041 pcscd: eventhandler.c:419:EHStatusHandlerThread() Card inserted into OMNIKEY CardMan 5x21 00 01 Apr 24 13:21:43 wks00041 pcscd: Card ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 03 00 01 00 00 00 00 6A Apr 24 13:21:43 wks00041 pcscd: eventhandler.c:350:EHStatusHandlerThread() Card Removed From OMNIKEY CardMan 5x21 00 01 ---- ATR from SDI-010 : --------- Apr 24 13:22:07 wks00041 pcscd: ifdhandler.c:787:IFDHPowerICC() lun: 1 Apr 24 13:22:07 wks00041 pcscd: eventhandler.c:419:EHStatusHandlerThread() Card inserted into SCM SDI 010 (608000df) 00 01 Apr 24 13:22:07 wks00041 pcscd: Card ATR: 3B F5 91 00 FF 91 81 71 FE 40 00 41 08 00 00 00 0D Apr 24 13:22:11 wks00041 pcscd: eventhandler.c:350:EHStatusHandlerThread() Card Removed From SCM SDI 010 (608000df) 00 01 At this point, I start running into problems. In my application, I call the following PCSC Api functions (in this order): SCardEstablishContext() - this returns a valid context SCardListReaders() - this returns a list with two readers - seems OK SCardConnect() returns SCARD_S_SUCCESS and a reasonable card handle SCardStatus() returns SCARD_S_SUCCESS - this seems to be OK too Now, I send the APDU "0xFF, 0xCA, 0x00, 0x00, 0x00" to retrieve the serial number of the card. The SCardTransmit() returns SCARD_S_SUCCESS, but only receives 2 bytes, which are the two status bytes. The status bytes values are "110" and "0". Does this indicate an Error ? (When I do this with the Omnikey, I get 6 bytes - 4 bytes UID + 2 status bytes. The Status bytes are "90" and "0" on an successful operation.) The same happens when I try to use the "Read Binary" APDU (0xFF 0xB0 .....). Again, I get SCARD_S_SUCCESS but no Data. So judging on the return values and status bytes, everything seems nice; but I get no data, except the two status bytes. Would you have any idea what I am doing wrong here ? Thanks very much in advance, best regards Dieter Ludovic Rousseau wrote: > On 24/04/06, tscher <[EMAIL PROTECTED]> wrote: > >>Good morning, > > > Hello, > > >>I am working on integrating mifare card functions into a linux >>application software. Last week, I ran into a problem while trying to >>connect a SCM Microsystems SDI-010 USB reader to my system. ere´s a >>short list of what I am using: >> >>Distribution: Fedora Core 4 >>Kernel 2.6.15 >>PcSc-lite Version 1.3.1 >>SDI010 Driver Version 2.0.1 (from http://www.scmmicro.com) > > > Have you tried my free software CCID driver [1] instead? Your reader > should be supported. > > Bye, > > [1] http://pcsclite.alioth.debian.org/ccid.html > > -- > Dr Ludovic Rousseau > > _______________________________________________ > Muscle mailing list > [email protected] > http://lists.drizzle.com/mailman/listinfo/muscle > > _______________________________________________ Muscle mailing list [email protected] http://lists.drizzle.com/mailman/listinfo/muscle
